Skip to content
AndyMark will be closed on Fridays through August 1st to allow staff flexible summer work hours.
AndyMark will be closed on Fridays through August 1st to allow staff flexible summer work hours.

Filters

$
$
#10 Flat Washer - am-1026 - migrated

#10 Flat Washer

$0.05 - $0.05
$0.05
$0.05
$0.05 - $0.05
$0.05
am-1026

A standard #10 Washer Specifications Documentation Bolt Size: #10 Finish: Zinc Inside Diameter: 0.219 in. Material: Steel Outsid...

View full details
$0.05 - $0.05
$0.05
$0.05
$0.05 - $0.05
$0.05
#10 Nord-Lock Washer - am-1693 - migrated Save 45% Save %

#10 Nord-Lock Washer

$0.96
$0.96 - $0.96
$0.96
$0.53
$0.53 - $0.53
$0.53
am-1693

Nord-Lock wedge-locking washers utilize tension instead of friction to secure bolted joints that are exposed to severe vibration and dynamic loads....

View full details
$0.96
$0.96 - $0.96
$0.96
$0.53
$0.53 - $0.53
$0.53
Save 45% Save %
#10 Star Washer - am-1148 - migrated

#10 Star Washer

$0.07 - $0.07
$0.07
$0.07
$0.07 - $0.07
$0.07
am-1148

Star washers engage into a surface they are tightened against helping to reduce the chance of parts loosening up over time. Description Specific...

View full details
$0.07 - $0.07
$0.07
$0.07
$0.07 - $0.07
$0.07
#10 x 0.75 in. Fender Washer - am-1523 - migrated

#10 x 0.75 in. Fender Washer

$0.21 - $0.21
$0.21
$0.21
$0.21 - $0.21
$0.21
am-1523

The large surface area of fender washers effectively distributes the force over a larger area better than standard washers. Description Specifi...

View full details
$0.21 - $0.21
$0.21
$0.21
$0.21 - $0.21
$0.21
#10 x 1 in. Fender Washer - am-1575 - migrated

#10 x 1 in. Fender Washer

$0.15 - $0.15
$0.15
$0.15
$0.15 - $0.15
$0.15
am-1575

The large surface area of fender washers effectively distributes the force over a larger area better than standard washers. Description Specifi...

View full details
$0.15 - $0.15
$0.15
$0.15
$0.15 - $0.15
$0.15
#4 Flat Washer - am-1345 - migrated

#4 Flat Washer

$0.07 - $0.07
$0.07
$0.07
$0.07 - $0.07
$0.07

am-1345

#4 Steel Washer Specifications Documentation Finish: Zinc Inside Diameter: 0.125 in. Material: Steel Outside Diameter: 0.312 in. ...

View full details
$0.07 - $0.07
$0.07
$0.07
$0.07 - $0.07
$0.07
#6 Flat Washer - am-1455 - migrated
Sold out

#6 Flat Washer

$0.06 - $0.06
$0.06
$0.06
$0.06 - $0.06
$0.06
am-1455

Washers are typically used distribute a fastener load over a wider area so components that are being held together are not damaged. Description ...

View full details
$0.06 - $0.06
$0.06
$0.06
$0.06 - $0.06
$0.06
Sold out
0 - 1/4 in. Tap Wrench - am-4514a - migrated
Save 20% Save %

0 - 1/4 in. Tap Wrench

$28.00
$28.00 - $28.00
$28.00
$22.40
$22.40 - $22.40
$22.40
am-4514a

Thread perfectly straight tap holes without removing your workpiece from the machine setup. Description Specifications Documentation Need ...

View full details
$28.00
$28.00 - $28.00
$28.00
$22.40
$22.40 - $22.40
$22.40
Save 20% Save %
0.125 In. ID 0.188 In. OD 0.25 In. Long Bushing - am-2333 - migrated

0.125 In. ID 0.188 In. OD 0.25 In. Long Bushing

$0.27 - $0.27
$0.27
$0.27
$0.27 - $0.27
$0.27

am-2333

Steel sleeve bushing with self-lubricating bearing surface Specifications Documentation Inside Diameter: 0.125 in. Length: 0.25 in. ...

View full details
$0.27 - $0.27
$0.27
$0.27
$0.27 - $0.27
$0.27
0.125 in. x 1 in. Slotted Spring Pin - am-1380 - migrated
Save 67% Save %

0.125 in. x 1 in. Slotted Spring Pin

$0.12
$0.12 - $0.12
$0.12
$0.04
$0.04 - $0.04
$0.04

am-1380

Slotted spring pins insert into holes and compress to fit inside Description Specifications Documentation A slotted spring pin is a mechan...

View full details
$0.12
$0.12 - $0.12
$0.12
$0.04
$0.04 - $0.04
$0.04
Save 67% Save %
0.192 ID 0.375 OD 0.125 Long Steel Spacer - am-1726 - migrated

0.192 ID 0.375 OD 0.125 Long Steel Spacer

$0.96 - $0.96
$0.96
$0.96
$0.96 - $0.96
$0.96
am-1726

This spacer is used in the Snap Latch Assembly. Specifications Documentation Inside Diameter: 0.192 in. Material: Steel Outside Diam...

View full details
$0.96 - $0.96
$0.96
$0.96
$0.96 - $0.96
$0.96
0.25 in x 2 in. Quick Release Pin - am-1344 - migrated

0.25 in x 2 in. Quick Release Pin

$3.50 - $3.50
$3.50
$3.50
$3.50 - $3.50
$3.50
am-1344

Quick Release Pins are useful in places where you need a temporary connection. Description Specifications Documentation Bumpers for robot...

View full details
$3.50 - $3.50
$3.50
$3.50
$3.50 - $3.50
$3.50
0.25 in. Dia. 15 in. Long Rod - am-5207 - migrated

0.25 in. Dia. 15 in. Long Rod

$4.10 - $4.10
$4.10
$4.10
$4.10 - $4.10
$4.10
am-5207

Description Specifications Documentation This Rod is used in the 2024 Everybot Intake to guide the NOTE properly into the intake. ...

View full details
$4.10 - $4.10
$4.10
$4.10
$4.10 - $4.10
$4.10
0.25 In. ID 0.25 In. long Self-Lubricated Bushing - am-0603 - migrated

0.25 In. ID 0.25 In. long Self-Lubricated Bushing

$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
am-0603

Description Specifications Documentation This self-lubricated bushing is used in the rollers on the 6 in. Mecanum SR Wheels. Insid...

View full details
$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
0.290 in. ID 0.550 in. OD 0.063 in. Long Steel Spacer For Falcon 500 Shaft - am-1538 - migrated

0.290 in. ID 0.550 in. OD 0.063 in. Long Steel Spacer For Falcon 500 Shaft

$0.47 - $0.47
$0.47
$0.47
$0.47 - $0.47
$0.47
am-1538

This spacer is included with the Falcon 500 Spline to 1/2 inch Hex Shaft Adapter. Description Specifications Documentation This 1/16 in. t...

View full details
$0.47 - $0.47
$0.47
$0.47
$0.47 - $0.47
$0.47
0.5 In. ID 0.5 In. Long Bushing - am-0253 - migrated
Save 62% Save %

0.5 In. ID 0.5 In. Long Bushing

$2.90
$2.90 - $2.90
$2.90
$1.10
$1.10 - $1.10
$1.10

am-0253

Steel sleeve bushing with self-lubricating bearing surface Specifications Documentation Bore: 0.5 in. Inside Diameter: 0.5 in. Mater...

View full details
$2.90
$2.90 - $2.90
$2.90
$1.10
$1.10 - $1.10
$1.10
Save 62% Save %
0.5 in. ID 0.5 in. Long Self-Lubricating Flanged Bushing - am-3866_bushing - migrated

0.5 in. ID 0.5 in. Long Self-Lubricating Flanged Bushing

$4.00 - $4.00
$4.00
$4.00
$4.00 - $4.00
$4.00
am-3866_bushing

Description Specifications Documentation This steel bushing has an inside diameter of 0.5 in. and a flange diameter of 0.9 in. It is coat...

View full details
$4.00 - $4.00
$4.00
$4.00
$4.00 - $4.00
$4.00
0.50 In. OD 0.25 In. Long Steel Press Fit Bushing - am-1511 - migrated
Save 66% Save %

0.50 In. OD 0.25 In. Long Steel Press Fit Bushing

$12.80
$12.80 - $12.80
$12.80
$4.30
$4.30 - $4.30
$4.30
am-1511

This bushing can be found in our peanut hole guide, which helps to make clean and precise holes in our peanut extrusion. Description Specificati...

View full details
$12.80
$12.80 - $12.80
$12.80
$4.30
$4.30 - $4.30
$4.30
Save 66% Save %
1-1/4 in. Round ID Shielded Bearing (R20-ZZ) - am-2928 - migrated
Sold out

1-1/4 in. Round ID Shielded Bearing (R20-ZZ)

$7.70 - $7.70
$7.70
$7.70
$7.70 - $7.70
$7.70

am-2928

Description Specifications Documentation Ball bearing, 1-1/4 bore, with double shieldsThis robust bearing is used on the Swerve & Ste...

View full details
$7.70 - $7.70
$7.70
$7.70
$7.70 - $7.70
$7.70
Sold out
1.25 x 0.25 in. Steel Dowel Pin - am-1292 - migrated
Sold out

1.25 x 0.25 in. Steel Dowel Pin

$0.54
$0.54 - $0.54
$0.54
$0.30
$0.30 - $0.30
$0.30
am-1292

Standard Steel Dowel Pin Specifications Documentation Diameter: 0.25 in. Length: 1.25 in. Material: Steel Weight: 0.018 lbs.

$0.54
$0.54 - $0.54
$0.54
$0.30
$0.30 - $0.30
$0.30
Sold out
1/2 in. External Bowed Retaining Ring - am-1540_2 - Image-2 - migrated
1/2 in. External Bowed Retaining Ring - am-1540_1 - Image-1 - migrated

1/2 in. External Bowed Retaining Ring

$0.30 - $0.30
$0.30
$0.30
$0.30 - $0.30
$0.30
am-1540

Also known as an E clip, this little device is perfect to help lock mechanisms in place along a shaft. Description Specifications Documentation...

View full details
$0.30 - $0.30
$0.30
$0.30
$0.30 - $0.30
$0.30
1/2 in. External Retaining Ring - am-2371 - migrated

1/2 in. External Retaining Ring

$0.34 - $0.34
$0.34
$0.34
$0.34 - $0.34
$0.34

am-2371

Retaining rings are used to hold components onto a shaft when installed. Description Specifications Documentation The ring is opened usin...

View full details
$0.34 - $0.34
$0.34
$0.34
$0.34 - $0.34
$0.34
1/2 in. Flat Washer - am-1748 - migrated

1/2 in. Flat Washer

$0.16 - $0.16
$0.16
$0.16
$0.16 - $0.16
$0.16
am-1748

This washer is made for a 1/2 in. Bolt. Specifications Documentation Bolt Size: 1/2 in. Finish: Zinc Inside Diameter: 0.531 in. M...

View full details
$0.16 - $0.16
$0.16
$0.16
$0.16 - $0.16
$0.16
1/2 in. Hex ID 1.125 in. OD Shielded Flanged Bearing (FR8ZZ-HexHD) - am-2986_2 - Image-2 - migrated
1/2 in. Hex ID 1.125 in. OD Shielded Flanged Bearing (FR8ZZ-HexHD) - am-2986_1 - Image-1 - migrated
Save 20% Save %

1/2 in. Hex ID 1.125 in. OD Shielded Flanged Bearing (FR8ZZ-HexHD)

$3.20
$3.20 - $3.20
$3.20
$2.56
$2.56 - $2.56
$2.56

am-2986

This Shielded Hex Bearing has a heavy duty Inner Race for greater durability. Description Specifications Documentation This is a Heavy Du...

View full details
$3.20
$3.20 - $3.20
$3.20
$2.56
$2.56 - $2.56
$2.56
Save 20% Save %
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS