Skip to content

Filters

$
$
CIM Face Spacer 715 - am-0555 - migrated

CIM Face Spacer 715

$12.00
$12.00 - $12.00
$12.00
$4.00
$4.00 - $4.00
$4.00

am-0555

This aluminum spacer is designed for the 2.5 in. CIM Motor. This spacer is 0.715 in. thick. Specifications Documentation Height: 0.715 i...

View full details
$12.00
$12.00 - $12.00
$12.00
$4.00
$4.00 - $4.00
$4.00
0.210 in. ID 0.510 in. OD 1.630 in. Long Aluminum Spacer - am-2355 - migrated

0.210 in. ID 0.510 in. OD 1.630 in. Long Aluminum Spacer

$3.00 - $3.00
$3.00
$3.00
$3.00 - $3.00
$3.00
am-2355

Description Specifications Documentation 1.63" Long Aluminum Spacer This is used within the Modulox gearboxes, as a "3 unit" spacer. ...

View full details
$3.00 - $3.00
$3.00
$3.00
$3.00 - $3.00
$3.00
Swerve & Steer - SwerveAndSteer_2 - Image-2 - migrated
Swerve & Steer - SwerveAndSteer_1 - Image-1 - migrated

Swerve & Steer - Drive Motor:CIM

$240.00 - $359.00
$240.00
$240.00 - $359.00
$240.00 - $359.00
$240.00

0 of 12 Options available!

Description Specifications Documentation Swerve, but also Steer! The most reliable, easy to use, and easy to integrate swerve module for ...

View full details
$240.00 - $359.00
$240.00
$240.00 - $359.00
$240.00 - $359.00
$240.00
12 Volt DC 192:1 Reduction Gearmotor with 0.5 in. Hex Output - am-4252_2 - Image-2 - migrated
12 Volt DC 192:1 Reduction Gearmotor with 0.5 in. Hex Output - am-4252_1 - Image-1 - migrated

12 Volt DC 192:1 Reduction Gearmotor with 0.5 in. Hex Output

$129.00 - $129.00
$129.00
$129.00
$129.00 - $129.00
$129.00
am-4252

Description Specifications Documentation This product is intended to be an alternate high quality option for customers seeking to purchas...

View full details
$129.00 - $129.00
$129.00
$129.00
$129.00 - $129.00
$129.00
XT30 Extension Cable (2-pack) - am-4601_2 - Image-2 - migrated
XT30 Extension Cable (2-pack) - am-4601_1 - Image-1 - migrated

XT30 Extension Cable (2-pack)

$11.00 - $11.00
$11.00
$11.00
$11.00 - $11.00
$11.00
am-4601

Description Specifications Documentation This extension cable has one male and one female connector and is 30 cm long. You will receive 2...

View full details
$11.00 - $11.00
$11.00
$11.00
$11.00 - $11.00
$11.00
M3 Nylock Nut, [Qty-50] - am-1214 - migrated

M3 Nylock Nut, [Qty-50]

$2.00 - $2.00
$2.00
$2.00
$2.00 - $2.00
$2.00
am-1214

M3 x 0.5 Nylock Nut Specifications Documentation Finish: Zinc plated Hex Width: 5 mm Material: Steel Package Quantity: 50 Thread...

View full details
$2.00 - $2.00
$2.00
$2.00
$2.00 - $2.00
$2.00
3/4 in. Bore, 1/2 in. Stroke Spring Extended Face Mount Pneumatic Cylinder - am-3494 - migrated

3/4 in. Bore, 1/2 in. Stroke Spring Extended Face Mount Pneumatic Cylinder

$59.00 - $59.00
$59.00
$59.00
$59.00 - $59.00
$59.00
am-3494

Specifications Documentation Bore: 0.75 in. (3/4) Round Manufacturer: phd, Inc. Port(s): 1/8 in. NPT Pressure Rating: 150 psi R...

View full details
$59.00 - $59.00
$59.00
$59.00
$59.00 - $59.00
$59.00
0.500 in. ID 0.625 in. OD 0.750 in. Long Nylon Spacer - am-0452 - migrated

0.500 in. ID 0.625 in. OD 0.750 in. Long Nylon Spacer

$0.50
$0.50 - $0.50
$0.50
$0.25
$0.25 - $0.25
$0.25
am-0452

0.750 in. long spacer, 1/2 in. nominal id Specifications Documentation Bore: 0.500 in. [12.7 mm] (1/2) Round Inside Diameter: 0.500 in...

View full details
$0.50
$0.50 - $0.50
$0.50
$0.25
$0.25 - $0.25
$0.25
8 in. Aluminum Omni Wheel w/ 1/2 in. Bearing - am-0431 - migrated

8 in. Aluminum Omni Wheel w/ 1/2 in. Bearing

$60.00 - $60.00
$60.00
$60.00
$60.00 - $60.00
$60.00
am-0431

Description Specifications Documentation 8 in. Aluminum Omni Wheel with 1/2 in. Bearing These wheels combine the best features of the And...

View full details
$60.00 - $60.00
$60.00
$60.00
$60.00 - $60.00
$60.00
Long SS Hex Shaft - am-0147 - migrated

Long SS Hex Shaft

$25.00
$25.00 - $25.00
$25.00
$7.00
$7.00 - $7.00
$7.00
am-0147

Description Specifications Documentation This is a longer version of the standard SS* Hex Shaft. The dog gear, small output gear, and lar...

View full details
$25.00
$25.00 - $25.00
$25.00
$7.00
$7.00 - $7.00
$7.00
107 Tooth 5 mm 15 mm Wide Timing Belt - am-3663 - migrated

107 Tooth 5 mm 15 mm Wide Timing Belt

$16.00 - $16.00
$16.00
$16.00
$16.00 - $16.00
$16.00
am-3663

Description Specifications Documentation This is a 107 tooth timing belt. Usage: Axle Locations for AM14U Variations (.pdf) Leng...

View full details
$16.00 - $16.00
$16.00
$16.00
$16.00 - $16.00
$16.00
INTO THE DEEP Basket Assembly - am-5405_blue - Color=Blue - migrated
INTO THE DEEP Basket Assembly - am-LR25Corner_1 - Image-1 - migrated

INTO THE DEEP℠ Basket Assembly

$79.00 - $79.00
$79.00
$79.00
$79.00 - $79.00
$79.00
0 of 2 Options available!

Description Specifications Documentation Two of these structures are used in the 2024-2025 FIRST Tech Challenge game, INTO THE DEEP℠ presente...

View full details
$79.00 - $79.00
$79.00
$79.00
$79.00 - $79.00
$79.00
Encoder Bracket with Servo Mount - am-0574 - migrated

Encoder Bracket with Servo Mount

$10.00
$10.00 - $10.00
$10.00
$6.00
$6.00 - $6.00
$6.00

am-0574

Description Specifications Documentation This is the encoder bracket and servo mount piece on the Super Shifter. This bracket can also be...

View full details
$10.00
$10.00 - $10.00
$10.00
$6.00
$6.00 - $6.00
$6.00
Large, Stackable Blocks - am-4018_36 - migrated

Large, Stackable Blocks

$144.00
$144.00 - $144.00
$144.00
$72.00
$72.00 - $72.00
$72.00
am-4018_36

Description Specifications Documentation This is a set of 36 lightweight, yellow, stackable blocks. These blocks are made of hard, blow...

View full details
$144.00
$144.00 - $144.00
$144.00
$72.00
$72.00 - $72.00
$72.00
1 9/16 in. Rubber Grommet - am-4498 - migrated
Save 50% Save %

1 9/16 in. Rubber Grommet

$2.20
$2.20 - $2.20
$2.20
$1.10
$1.10 - $1.10
$1.10
am-4498

Grommets provide protection for wires passing through a hole in a panel by preventing sharp edges from cutting important cables. Description Spe...

View full details
$2.20
$2.20 - $2.20
$2.20
$1.10
$1.10 - $1.10
$1.10
Save 50% Save %
Small Bearing Plate for 2x1 Elevator - am-3793 - migrated

Small Bearing Plate for 2x1 Elevator

$4.00
$4.00 - $4.00
$4.00
$2.00
$2.00 - $2.00
$2.00
am-3793

Description Specifications Documentation This plate can be used as a bracket to hold components together. This was the bracket used in t...

View full details
$4.00
$4.00 - $4.00
$4.00
$2.00
$2.00 - $2.00
$2.00
CIMple Box Housing - am-0739 - migrated

CIMple Box Housing

$11.00 - $11.00
$11.00
$11.00
$11.00 - $11.00
$11.00

am-0739

Housing for CIMple Box Specifications Documentation Material: Nylon 6/6 with long fiberglass fill Size: 3.550 in. x 5.760 in. x 0.755 ...

View full details
$11.00 - $11.00
$11.00
$11.00
$11.00 - $11.00
$11.00
Pneumatic Shifter Upgrade Package - am-0113 - migrated

Pneumatic Shifter Upgrade Package

$39.00
$39.00 - $39.00
$39.00
$15.00
$15.00 - $15.00
$15.00

am-0113

Description Specifications Documentation The purpose of this product is to change an existing AM Servo Shifter to an AM Shifter Gen.2. Al...

View full details
$39.00
$39.00 - $39.00
$39.00
$15.00
$15.00 - $15.00
$15.00
48 Tooth 20 DP 0.5 in. Hex Bore Aluminum Gear - am-2036 - migrated

48 Tooth 20 DP 0.5 in. Hex Bore Aluminum Gear

$22.00 - $22.00
$22.00
$22.00
$22.00 - $22.00
$22.00
am-2036

This is the 48 Tooth Gear that can be used in place of am-0885. Specifications Documentation Bore: 0.500 in. [12.7 mm] (1/2) Hex Diame...

View full details
$22.00 - $22.00
$22.00
$22.00
$22.00 - $22.00
$22.00
FIRST Tech Challenge Field Panel - am-2160a - migrated

FIRST Tech Challenge Field Panel

$44.00 - $44.00
$44.00
$44.00
$44.00 - $44.00
$44.00
am-2160a

Description Specifications Documentation This is the center side panel that makes up the perimeter for the FTC playing field (am-0481a). ...

View full details
$44.00 - $44.00
$44.00
$44.00
$44.00 - $44.00
$44.00
15 Tooth 0.6 Module 0.125 in. Round Bore Steel Pinion Gear - am-2892 - migrated

15 Tooth 0.6 Module 0.125 in. Round Bore Steel Pinion Gear

$3.30 - $3.30
$3.30
$3.30
$3.30 - $3.30
$3.30
am-2892

Description Specifications Documentation This pinion gear attaches to an rs-550 or rs-540 motor so it can be used with a BaneBots NeveRes...

View full details
$3.30 - $3.30
$3.30
$3.30
$3.30 - $3.30
$3.30
57 Sport RS-700 & RS-500 Mounting Kit - am-3782 - migrated

57 Sport RS-700 & RS-500 Mounting Kit

$11.00 - $11.00
$11.00
$11.00
$11.00 - $11.00
$11.00

am-3782

Description Specifications Documentation This bundle includes the needed hardware to mount an RS-500 and RS-700 motor to a 57 Sport Gearb...

View full details
$11.00 - $11.00
$11.00
$11.00
$11.00 - $11.00
$11.00
Belt Pulley Kit for 6WD on C-Base 2013 Chassis - am-2451 - migrated

Belt Pulley Kit for 6WD on C-Base 2013 Chassis

$140.00 - $140.00
$140.00
$140.00
$140.00 - $140.00
$140.00

am-2451

Description Specifications Documentation Here is a kit of pulleys and belts which were provided in the 2013 FRC AndyMark Drive Chassis. N...

View full details
$140.00 - $140.00
$140.00
$140.00
$140.00 - $140.00
$140.00
ToughBox Micro Flat Shaft Plate - am-3229 - migrated

ToughBox Micro Flat Shaft Plate

$16.00 - $16.00
$16.00
$16.00
$16.00 - $16.00
$16.00
am-3229

Description Specifications Documentation The Flat Shaft Plate is one plate option for the Toughbox Micro. This plate allows the TB Micro ...

View full details
$16.00 - $16.00
$16.00
$16.00
$16.00 - $16.00
$16.00
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS