Skip to content
This product has been discontinued.
Nano Tube 31, Left, Three 1/2 in. Key Shafts, 25 Chain Drive - am-0689L - migrated

Nano Tube 31, Left, Three 1/2 in. Key Shafts, 25 Chain Drive

by AndyMark
$286.00
$286.00 - $286.00
$286.00
$140.00
$140.00 - $140.00
$140.00

The information provided on this page is retained for posterity.

This product is no longer for sale at AndyMark and has been discontinued

This product is currently unavailable for purchase

SKU am-0689L
  • Description
  • Specifications
  • Product Usage:
    All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.

    This 31-inch-long Nano Tube houses two complete gearboxes, each having the same gearing and shafts as the Nano with 500 Key Shaft. This unit also has a third central shaft, which is dropped by 0.13 in. compared to the end shafts. This central shaft is driven by a 25-series chain from one of the end drive shafts. Nano Tube accepts two 2.5 in. CIM Motors. Hardware is included for attaching this motor.

    This product is intended to be used as a complete drive module for the side of a 6-wheel-drive robot. A second tube is to be used on the opposite side of the robot in order to make the complete drive chassis. Version: 3-shaft, 500 Key, Chain Drive

    Weight: 5.4 pounds, not including motors and encoders

    Optional Gear Ratios:

    Ratio CIM Gear Lg. Cluster Gear Sm. Cluster Gear Lg. Output Gear
    10.71:1 14 tooth 50 tooth 16 tooth 48 tooth
    8.45:1 14 tooth 50 tooth 19 tooth 45 tooth
    5.95:1 14 tooth 50 tooth 24 tooth 40 tooth


    Weight Reduction with Optional Parts:
    Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
    Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear. Additional Encoder: An optional Encoder Package can be purchased and added to this Toughbox. If you already have a US Digital Encoder to fit this Toughbox, this Encoder Mount Pad will help you mount the encoder to the Toughbox. Here is a guide for encoder installation and alignment.

    Aluminum Hex Output Shafts:
    The Toughbox Nano Tube can use an optional Short 1/2 in. Hex Aluminum Output Shaft with Magnet for Toughbox® Series (am-am-0397a) as a separate purchase but a FR8ZZ-Hex bearing MUST also be ordered SEPARATELY to replace the FR8ZZ bearing supporting each output shaft. Also, the sprockets must be swapped out for 1/2 in. hex bore sprockets.

    Chain and Sprocket Specifications: Made in the USA:
     Bearings, chain and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.
    • Gear Type: Spur gears
    • Input Gear: CIM Gear
    • Large Cluster Gear: 50 tooth
    • Large Output Gear: 50 tooth
    • Material: 6061 Aluminum
    • Output Shaft: 1/2 in. diameter
    • Small Cluster Gear: 14 tooth
    • Weight: 9.181 lbs.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS