Skip to content
If we sell it, it's here. Use our filter feature to narrow down what your looking for, or just keep scrolling to see all of our products.

Filters

$
$
Thermal Sticker 5 Pack - am-3225_5 - migrated

Thermal Sticker 5 Pack

$8.00 - $14.90
$8.00
$8.00 - $14.90
$8.00 - $14.90
$8.00

2 Options available!

The Thermal Sticker is designed to indicate the temperature of any surface that an operator might be concerned about getting hot. Description Sp...

View full details
$8.00 - $14.90
$8.00
$8.00 - $14.90
$8.00 - $14.90
$8.00
#35 Chain Break Replacement Bolt with Pin - am-1516 - migrated

#35 Chain Break Replacement Bolt with Pin

$7.90 - $7.90
$7.90
$7.90
$7.90 - $7.90
$7.90
am-1516

Description Specifications Documentation This bolt with pin is a replacement for the #35 chain break. This component does the work of pus...

View full details
$7.90 - $7.90
$7.90
$7.90
$7.90 - $7.90
$7.90
PWM Extension Cables - am-PWMCable_2 - Image-2 - migrated
PWM Extension Cables - am-PWMCable_1 - Image-1 - migrated

PWM Extension Cables

$2.20 - $2.70
$2.20
$2.20 - $2.70
$2.20 - $2.70
$2.20
3 Options available!

This is a PWM cable, also known as a "servo extension cable." Description Specifications Documentation 22 gauge wire is used in these cab...

View full details
$2.20 - $2.70
$2.20
$2.20 - $2.70
$2.20 - $2.70
$2.20
1/8 in. ID 3/8 in. OD Black Surgical Tubing - am-3581-10 - Length=10 feet - migrated
1/8 in. ID 3/8 in. OD Black Surgical Tubing - am-3581_1 - Image-1 - migrated

1/8 in. ID 3/8 in. OD Black Surgical Tubing

$11.70 - $22.00
$11.70
$11.70 - $22.00
$11.70 - $22.00
$11.70
2 Options available!

Surgical Tubing is a highly flexible and grippy elastic tubing that is good for a variety of applications. Description Specifications Documenta...

View full details
$11.70 - $22.00
$11.70
$11.70 - $22.00
$11.70 - $22.00
$11.70
1/4 in. Fittings Male Pneumatic Plug - am-3981 - migrated

1/4 in. Fittings Male Pneumatic Plug

$3.40 - $3.40
$3.40
$3.40
$3.40 - $3.40
$3.40
am-3981

This small plug can be used to cap off open 1/4 in. pneumatic fittings. Description Specifications Documentation This handy little plug ca...

View full details
$3.40 - $3.40
$3.40
$3.40
$3.40 - $3.40
$3.40
SDS MK4i Pinion Kits - am-4753 - Motor Type=Falcon - migrated
SDS MK4i Pinion Kits - am-4752 - Motor Type=NEO - migrated

SDS MK4i Pinion Kits

$24.00 - $26.00
$24.00
$24.00 - $26.00
$24.00 - $26.00
$24.00
3 Options available!

These Pinion Kits are used to allow NEO, Kraken, and Falcon Motors to interface with the SDS MK4i Modules. Description Specifications Document...

View full details
$24.00 - $26.00
$24.00
$24.00 - $26.00
$24.00 - $26.00
$24.00
Toughbox Classic Series 1/2 in. Output Shafts - am-0802a - Shaft Type=Hex, Size=Short - migrated
Toughbox Classic Series 1/2 in. Output Shafts - am-ToughboxClassicOutputShafts_1 - Image-1 - migrated
Save up to 54% Save %

Toughbox Classic Series 1/2 in. Output Shafts

$13.80 - $34.00
$13.80 - $34.00
$13.80
$10.60 - $15.90
$10.60 - $15.90
$10.60

4 Options available!

Description Specifications Documentation The keyed short steel output shaft is optional for the Toughbox® series gearboxes. This shaft in...

View full details
$13.80 - $34.00
$13.80 - $34.00
$13.80
$10.60 - $15.90
$10.60 - $15.90
$10.60
Save up to 54% Save %
CIMCoder 256 Hi-Resolution CIM Encoder - am-4027 - migrated

CIMCoder 256 Hi-Resolution CIM Encoder

$58.00 - $58.00
$58.00
$58.00
$58.00 - $58.00
$58.00

am-4027

The CIMCoder 256 is a high resolution version of the CIMcoder. Description Specifications Documentation The CIMCoder 256 is a high resolut...

View full details
$58.00 - $58.00
$58.00
$58.00
$58.00 - $58.00
$58.00
6 mm ID Spacer Tubing Stock And Tube Cutter - am-4129 - Option=Spacer Tubing Cutter - migrated
6 mm ID Spacer Tubing Stock And Tube Cutter - am-4137 - Option=Spacer Tubing Starter Bundle - migrated
Save up to 38% Save %

6 mm ID Spacer Tubing Stock And Tube Cutter

$2.40 - $10.60
$2.40 - $10.60
$2.40
$2.40 - $10.60
$2.40 - $10.60
$2.40
3 Options available!

This pair of tubing and tube cutter can create customized length spacers. Description Specifications Documentation The AndyMark Product De...

View full details
$2.40 - $10.60
$2.40 - $10.60
$2.40
$2.40 - $10.60
$2.40 - $10.60
$2.40
Save up to 38% Save %
CAN Connector Board - am-4130_2 - Image-2 - migrated
CAN Connector Board - am-4130_1 - Image-1 - migrated

CAN Connector Board

$5.90 - $5.90
$5.90
$5.90
$5.90 - $5.90
$5.90
am-4130

This connector board is designed to join together two CAN devices in series. Description Specifications Documentation Designed to join to...

View full details
$5.90 - $5.90
$5.90
$5.90
$5.90 - $5.90
$5.90
Magnetic Nutsetters - am-2754 - Size=5/16 in. - migrated
Magnetic Nutsetters - am-Nutsetter_1 - Image-1 - migrated

Magnetic Nutsetters

$6.40 - $29.00
$6.40
$6.40 - $29.00
$6.40 - $29.00
$6.40

5 Options available!

These Magnetic Nutsetters easily fit into a drill or power screwdriver with a standard 1/4 in. hex. Description Specifications Documentation ...

View full details
$6.40 - $29.00
$6.40
$6.40 - $29.00
$6.40 - $29.00
$6.40
Robot Power Cable Kit, custom lengths up to 36 in. - am-RbtPwrCblKit_1 - Image-1 - migrated

Robot Power Cable Kit, custom lengths up to 36 in.

$82.00 - $97.00
$82.00
$82.00 - $97.00
$82.00 - $97.00
$82.00
182 Options available!

Description Specifications Documentation Everyone's Robot is different, this lets you customize the wire gauge, jacket type and lengths...

View full details
$82.00 - $97.00
$82.00
$82.00 - $97.00
$82.00 - $97.00
$82.00
Insulated Terminals Crimp Tool - am-2215 - migrated

Insulated Terminals Crimp Tool

$72.00 - $72.00
$72.00
$72.00
$72.00 - $72.00
$72.00

am-2215

Description Specifications Documentation This is a crimping tool for 2 piece insulated terminals and connectors with a single crimp or a ...

View full details
$72.00 - $72.00
$72.00
$72.00
$72.00 - $72.00
$72.00
10-32 x 3 in. Socket Head Cap Screw - am-1522 - migrated
Save 48% Save %

10-32 x 3 in. Socket Head Cap Screw

$2.10
$2.10 - $2.10
$2.10
$1.10
$1.10 - $1.10
$1.10
am-1522

Description Specifications Documentation This screw has a 10-32 thread and is 3 in. long. If you found this page due to a small typo in a...

View full details
$2.10
$2.10 - $2.10
$2.10
$1.10
$1.10 - $1.10
$1.10
Save 48% Save %
RedLine Encoder Kit - am-3773a - migrated

RedLine Encoder Kit

$55.00 - $55.00
$55.00
$55.00
$55.00 - $55.00
$55.00
am-3773a

The RedLine Encoder Kit is designed to adapt the AM Mag Encoder(am-3479) onto the back shaft of the RedLine Motor. Description Specifications D...

View full details
$55.00 - $55.00
$55.00
$55.00
$55.00 - $55.00
$55.00
20 Tooth Track Drive Pulleys - am-3967 - Track Drive=TreadRunner - migrated
20 Tooth Track Drive Pulleys - am-20ToothTrackDrivePulley_1 - Image-1 - migrated
Save up to 36% Save %

20 Tooth Track Drive Pulleys

$11.70 - $12.80
$11.70 - $12.80
$11.70
$7.50 - $12.80
$7.50 - $12.80
$7.50

2 Options available!

These molded plastic pulley halves are specially designed to drive our TreadRunner or Rhino Track belts. Description Specifications Documentati...

View full details
$11.70 - $12.80
$11.70 - $12.80
$11.70
$7.50 - $12.80
$7.50 - $12.80
$7.50
Save up to 36% Save %
DeCIMate Assembled Gearbox - am-3745 - migrated

DeCIMate Assembled Gearbox

$122.00 - $122.00
$122.00
$122.00
$122.00 - $122.00
$122.00
am-3745

This pre-assembled gearbox is used with AndyMark RedLine Motors to give more power than a CIM motor. Description Specifications Documentation...

View full details
$122.00 - $122.00
$122.00
$122.00
$122.00 - $122.00
$122.00
0.625 in. Wide 30 in. Long Constant Force Spring - am-4657 - migrated

0.625 in. Wide 30 in. Long Constant Force Spring

$9.60 - $9.60
$9.60
$9.60
$9.60 - $9.60
$9.60
am-4657

This is a compact, tightly coiled spring used with linear extensions. Description Specifications Documentation No matter how far you exten...

View full details
$9.60 - $9.60
$9.60
$9.60
$9.60 - $9.60
$9.60
Retaining Ring Pliers - am-4013 - migrated

Retaining Ring Pliers

$45.00 - $45.00
$45.00
$45.00
$45.00 - $45.00
$45.00

am-4013

This tool can open all Retaining Rings found on AndyMark Products. Description Specifications Documentation CHANNELLOCK Retaining Ring pli...

View full details
$45.00 - $45.00
$45.00
$45.00
$45.00 - $45.00
$45.00
Hex Head Plug - 1/4 in. NPT - am-2185 - Material=Brass with nickel plating - migrated
Hex Head Plug - 1/4 in. NPT - am-2959 - Material=Nylon - migrated

Hex Head Plug - 1/4 in. NPT

$0.80 - $3.30
$0.80
$0.80 - $3.30
$0.80 - $3.30
$0.80

2 Options available!

Description Specifications Documentation Select either a Nylon or Brass plug for a 1/4 in. NPT port. Nylon has an operating pressure up t...

View full details
$0.80 - $3.30
$0.80
$0.80 - $3.30
$0.80 - $3.30
$0.80
10-32 x 2.75 in. Socket Head Cap Screw - am-1397 - migrated

10-32 x 2.75 in. Socket Head Cap Screw

$2.10 - $2.10
$2.10
$2.10
$2.10 - $2.10
$2.10

am-1397

#10-32 x 2.75 in. Grade 8 Hex Drive Zinc Finish Alloy Steel Socket Cap Screw Specifications Documentation Drive: 5/32 in. Hex Finish: ...

View full details
$2.10 - $2.10
$2.10
$2.10
$2.10 - $2.10
$2.10
Hi-Tec Servo Hi-Tec HS-805BB - am-2191_2 - Image-2 - migrated
Hi-Tec Servo Hi-Tec HS-805BB - am-2191_1 - Image-1 - migrated

Hi-Tec Servo Hi-Tec HS-805BB

$58.00 - $58.00
$58.00
$58.00
$58.00 - $58.00
$58.00

am-2191

This is a high powered servo. Description Specifications Documentation This servo offers a higher level of power than many servos. If you ...

View full details
$58.00 - $58.00
$58.00
$58.00
$58.00 - $58.00
$58.00
25 Series 32 Tooth Ninja Star Sprocket - am-3284 - migrated
Save 45% Save %

25 Series 32 Tooth Ninja Star Sprocket

$9.60
$9.60 - $9.60
$9.60
$5.30
$5.30 - $5.30
$5.30

am-3284

The Ninja Star Sprocket is a series of sprockets aimed at giving FTC more options for moving drive systems and mechanisms. Description Specifica...

View full details
$9.60
$9.60 - $9.60
$9.60
$5.30
$5.30 - $5.30
$5.30
Save 45% Save %
5 inch Diameter Gopher Sport Screamin' Yellow ResisDent™ Softball - am-3376 - migrated

5 inch Diameter Gopher Sport Screamin' Yellow® ResisDent™ Softball

$1.10 - $1.10
$1.10
$1.10
$1.10 - $1.10
$1.10

am-3376

This Screamin' Yellow® ResisDent™ Ball is five inches in diameter and is manufactured by Gopher. Description Specifications Documentation ...

View full details
$1.10 - $1.10
$1.10
$1.10
$1.10 - $1.10
$1.10
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS