Skip to content
0.5 in. Aluminum Hex Spacer Stock - am-HexSpacerAL_1 - Image-1 - migrated

0.5 in. Aluminum Hex Spacer Stock

by AndyMark
$2.40 - $31.00
$2.40
$2.40 - $31.00
$2.40 - $31.00
$2.40
This extrusion will fit over a 0.5 in hex shaft and is available in different lengths and colors for a variety of uses.
Choose Color
Choose Length
SKU
  • Description
  • Specifications
  • Documentation
  • Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one, three, and six foot lengths. This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop at spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.

    Have a more light weight design in mind? Check out our molded plastic hex spacers for your lower load assemblies.

    The anodizing process may result in colors that are not exact to the reference photo. FED-STD-595 is a color description system. These anodized products can be described by this system as follows:
    Red: 31310-31136
    Green: 24449-24272
    Violet: 27142-27144
    Blue: 35183-35180
    Gold: 10260-10371

    • Inside Diameter: 0.5 in. [12.7 mm] (1/2) Hex
    • Material: Aluminum 6005A-T61
    • Outside Diameter: 0.7 in. Round
    • Tolerance: (+/- 0.5 in.) for lengths over 1 ft., (+/- 0.020 in.) for lengths under 1 ft.
    • Weight: 0.226 lbs./ft.

  • CAD Files

    am-3896-1200 1.20in Hex Spacer Extrusion.STEP

    Layout Prints

    am-3896 Hex Spacer Extrusion REV2.PDF
    am-3896 Hex Spacer Extrusion.pdf
    am-3896-1200 1.20in Hex Spacer Extrusion.PDF
    am-3896-1200 1.2in AL 500IN Hex Spacer.pdf

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Robert Lytkowski

0.5 in. Aluminum Hex Spacer Stock

L
LR from SYKESVILLE
Good item

This is a close fitting spacer for 1/2 inch hex shaft. It can be cut to length.

Extreme caution is needed when clamping to cut if you do not have an appropriate lathe as the alloy deforms under moderate forces. If clamping in a vice it is best to insert a piece of hex shaft to support the work.

With caution makes spacers for various assemblies.

Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS