Window Motor Mount Bracket

5 Stars

4 Stars

'This mounting bracket does work reasonably well to mount a window motor. However, there is interference with raised areas near the motor body that prevent it seating flat unless you cut/file away part of the bracket or add sims.

The mounting holes pilot neatly with the short mounting posts on the motor, but because the holes are very large diameter, you will need to provide your own oversized washers - it would have been better if AndyMark included suitable mounting hardware.

Also, the large hole at the end of the bracket is too small for the plastic hub that mates with this motor (fc14-135) to fit through, so it just rides on the surface of the bracket adding friction. Since the outer-most two inches of the bracket don't even touch the motor, we cut it off so the hub could mate deeper into the splines.

It is definitely working for us, and it was way easier than machining our own, but be prepared to modify it a bit to get it to fit the way you need it to.'

'OK'

'Our team has struggled with various ways to mount the window motors. No one on our team thought to use the center hub and only one mounting bolt! We always struggled with the staggered mounting holes when designing our own brackets. Thanks Andymark.'