Filters
- Assembled Cables (3)
- Bearings (1)
- Brackets & Plates (8)
- Cable Management (1)
- Caps & Plugs (1)
- Chain (2)
- Compliant & Intake (4)
- Connectors (2)
- Extrusion & Structure (2)
- Fasteners (1)
- FIRST Tech Challenge Perimeter & Accessories (2)
- FIRST Tech Challenge Robot Build Bundles (1)
- FTC Chassis (1)
- FTC Control System (2)
- Gearboxes (15)
- Gearmotors (2)
- Gears (1)
- Hardware (8)
- Hubs (1)
- Joysticks & Buttons (1)
- Linear Motion (2)
- Mecanum Wheels (2)
- Mechanical Tools (3)
- Metal & Plastic Sheet (1)
- Miscellaneous Hardware (1)
- Motors (1)
- Nuts (1)
- Omni Wheels (2)
- Performance Wheels (1)
- PicoBox (3)
- Picobox Gearboxes and Parts (2)
- Pulleys (1)
- Rivets (1)
- Screws (7)
- Servos (5)
- Shafts (1)
- Spacers (5)
- Sprockets (4)
- Tread (3)
- Wire (1)
- 0.125 in. [3.2 mm] (1/8) Round (1)
- 0.197 in. [5 mm] Hex (3)
- 0.236 in. [6 mm] Round (1)
- 0.242 in. [6.1 mm] Round (2)
- 0.257 in. [6.5 mm] Round (3)
- 0.313 in. [8 mm] (5/16) NUB Bore (10)
- 0.313 in. [8 mm] (5/16) Round (4)
- 0.375 in. [9.5 mm] (3/8) Hex (3)
- 0.500 in. [12.7 mm] (1/2) Hex (7)
- 1.125 in. [28.6 mm] (1-1/8) Bearing Bore (3)
- 0.236 in. [6 mm] (1)
- 0.25 in. [6.4 mm] (2)
- Between 0.25 in. [6.4 mm] and 0.375 in. [9.5 mm] (1)
- Between 0.5 in. [12.7 mm] and 0.625 in. [15.9 mm] (3)
- Between 0.625 in. [15.9 mm] and 0.75 in. [19.1 mm] (1)
- 0.75 in. [19.1 mm] (2)
- 1 in. [25.4 mm] (1)
- Between 1 in. [25.5 mm] and 1.25 in. [31.8 mm] (1)
- Between 1.25 in. [31.8 mm] and 1.5 in. [38.1 mm] (1)
- 1.75 in. [44.5 mm] (2)
- Between 2.52 in. [64 mm] and 2.6 in. [66 mm] (1)
- 2.953 in. [75 mm] (1)
- 15.75 in. [400.05 mm] (1)
5/16 in. Hex Female-Female 32 mm Long Standoff
This is a 5/16 in. hex female to female standoff. Description Specifications Documentation This 32 mm long standoff allows you to place tw...
View full detailsPicoBox Solo
The PicoBox Solo is a robust mounting solution for chain driven mechanisms. Description Specifications Documentation The PicoBox gearboxe...
View full detailsTreadRunner Tread
The perfect sized tread for the TreadRunner. Description Specifications Documentation The perfect sized tread for the TreadRunner. Used a...
View full detailsS3 Linear Motion Kit Main Plate
This plate is used within the S3 Linear Motion Kit to hold the bearings and the rest of the assembly to the S3 extrusion. Description Specifica...
View full detailsPicoBox Twin Servo Motor Plate
This plate is used within the PicoBox Servo Micro gearbox. Description Specifications Documentation This plate accepts up to two servos a...
View full detailsPicoBox Turbo Plate
This plate makes up the framework of the PicoBox Turbo gearbox. Description Specifications Documentation Holes for the output shaft, and ...
View full detailsPicoBox Super Servo Shaft Plate
This is the output side plate on the PicoBox Servo gearbox. Specifications Documentation Material: 5052 Aluminum Overall Depth: 0.5 i...
View full detailsFTC Driver Station Table Legs
Description Specifications Documentation These pieces of Polycarb are used in the AndyMark FIRST Tech Challenge Driver Station Table. ...
View full detailsPicoBox Twin Servo Shaft Plate
Description Specifications Documentation This plate is used within the the PicoBox Servo Micro gearbox. This plate supports the output sh...
View full detailsPicoBox Twin Turbo Plate
This is the outside plate for a PicoBox Twin Turbo. Description Specifications Documentation This plate is the magic behind the PicoBox Tw...
View full details