Skip to content

Filters

$
$
5.5 mm Right Angle Male DC Barrel 20 AWG Cable - am-4356 - migrated

5.5 mm Right Angle Male DC Barrel 20 AWG Cable

$4.00
$4.00 - $4.00
$4.00
$2.00
$2.00 - $2.00
$2.00

am-4356

Description Specifications Documentation This DC power barrel is perfect for all your homebrew electronics needs. This cable has pre-tinn...

View full details
$4.00
$4.00 - $4.00
$4.00
$2.00
$2.00 - $2.00
$2.00
5/16 Flat Washer [Qty-25] - am-1219 - migrated

5/16 Flat Washer [Qty-25]

$1.75 - $1.75
$1.75
$1.75
$1.75 - $1.75
$1.75

am-1219

Specifications Documentation Finish: Hardened surface Inside Diameter: 5/16 in. Material: Steel Outside Diameter: 0.7 in. Packa...

View full details
$1.75 - $1.75
$1.75
$1.75
$1.75 - $1.75
$1.75
5/16 in. (8 mm) Round Bore Split Collar Clamp - am-2383 - migrated

5/16 in. (8 mm) Round Bore Split Collar Clamp

$3.50 - $3.50
$3.50
$3.50
$3.50 - $3.50
$3.50

am-2383

Description Specifications Documentation Aluminum Clamp On Shaft Collar, 5/16 inch (8 mm) BoreThis collar clamp works well as a secure cl...

View full details
$3.50 - $3.50
$3.50
$3.50
$3.50 - $3.50
$3.50
5/16 in. E-Clip - am-1389 - migrated

5/16 in. E-Clip

$0.28 - $0.28
$0.28
$0.28
$0.28 - $0.28
$0.28
am-1389

E-Clips are used with a slotted or grooved shaft to keep an object in place. Description Specifications Documentation E-Clips are desig...

View full details
$0.28 - $0.28
$0.28
$0.28
$0.28 - $0.28
$0.28
5/16 in. Hex Female to Female 64 mm Long Standoff - am-3685-64 - migrated
Save 46% Save %

5/16 in. Hex Female to Female 64 mm Long Standoff

$1.40
$1.40 - $1.40
$1.40
$0.75
$0.75 - $0.75
$0.75
am-3685-64

This is a 5/16 in. hex female to female standoff. Description Specifications Documentation This 64 mm long standoff allows you to place tw...

View full details
$1.40
$1.40 - $1.40
$1.40
$0.75
$0.75 - $0.75
$0.75
Save 46% Save %
5/16 in. Hex Female-Female 16 mm Long Standoff - am-3685-16 - migrated

5/16 in. Hex Female-Female 16 mm Long Standoff

$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
am-3685-16

This is a 5/16 in. hex female to female standoff. Description Specifications Documentation This 16 mm long standoff allows you to place tw...

View full details
$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
5/16 in. Hex Female-Female 32 mm Long Standoff - am-3685-32 - migrated
Save 54% Save %

5/16 in. Hex Female-Female 32 mm Long Standoff

$1.40
$1.40 - $1.40
$1.40
$0.64
$0.64 - $0.64
$0.64
am-3685-32

This is a 5/16 in. hex female to female standoff. Description Specifications Documentation This 32 mm long standoff allows you to place tw...

View full details
$1.40
$1.40 - $1.40
$1.40
$0.64
$0.64 - $0.64
$0.64
Save 54% Save %
5/16-18 Nylock Nut - am-1687 - migrated
Save 42% Save %

5/16-18 Nylock Nut

$0.12
$0.12 - $0.12
$0.12
$0.07
$0.07 - $0.07
$0.07
am-1687

This nut has a nylon insert to keep it in place once attached to a 5/16-18 threaded item. Specifications Documentation Finish: Zinc Ma...

View full details
$0.12
$0.12 - $0.12
$0.12
$0.07
$0.07 - $0.07
$0.07
Save 42% Save %
5/16-18 x 0.5 in. Shoulder Bolt with Nylon Patch - am-1617 - migrated

5/16-18 x 0.5 in. Shoulder Bolt with Nylon Patch

$5.20 - $5.20
$5.20
$5.20
$5.20 - $5.20
$5.20
am-1617

Description Specifications Documentation This 5/16-18 thread bolt is used in the AndyMark Tube Roller. Drive: 3/16 in. Hex Finis...

View full details
$5.20 - $5.20
$5.20
$5.20
$5.20 - $5.20
$5.20
5/16-18 x 2.5 in. Shoulder Bolt - am-1684 - migrated
Save 34% Save %

5/16-18 x 2.5 in. Shoulder Bolt

$2.90
$2.90 - $2.90
$2.90
$1.90
$1.90 - $1.90
$1.90
am-1684

This shoulder bolt features a 5/16-18 thread with a 2.5 in. long shoulder. Specifications Documentation Drive: 3/16 in. Hex Finish: Bl...

View full details
$2.90
$2.90 - $2.90
$2.90
$1.90
$1.90 - $1.90
$1.90
Save 34% Save %
5/8 in. Ball Caster - am-4353 - migrated

5/8 in. Ball Caster

$4.80 - $4.80
$4.80
$4.80
$4.80 - $4.80
$4.80
am-4353

This Ball Caster can be used on small robot platforms, like the AndyMark Skitter. Description Specifications Documentation Ball casters ca...

View full details
$4.80 - $4.80
$4.80
$4.80
$4.80 - $4.80
$4.80
5/8 in. ID 1 3/8 in. OD Shielded Bearing (1623ZZ) - am-4467 - migrated

5/8 in. ID 1 3/8 in. OD Shielded Bearing (1623ZZ)

$3.80 - $3.80
$3.80
$3.80
$3.80 - $3.80
$3.80
am-4467

Description Specifications Documentation This is a 5/8 in. round bore bearing that is unflanged. The Shielded Ball Bearing is a great way...

View full details
$3.80 - $3.80
$3.80
$3.80
$3.80 - $3.80
$3.80
5/8 in. ID, 7/8 in. OD Black Surgical Tubing - am-4656-3 - migrated

5/8 in. ID, 7/8 in. OD Black Surgical Tubing

$10.60 - $32.00
$10.60
$10.60 - $32.00
$10.60 - $32.00
$10.60
2 Options available!

Surgical Tubing is a highly flexible and grippy elastic tubing that is good for a variety of applications. Description Specifications Documenta...

View full details
$10.60 - $32.00
$10.60
$10.60 - $32.00
$10.60 - $32.00
$10.60
5/8 in. OD 1/8 in. thick Magnet With Countersink for 6-32 Screw - am-3892_2 - Image-2 - migrated
5/8 in. OD 1/8 in. thick Magnet With Countersink for 6-32 Screw - am-3892_1 - Image-1 - migrated
Sold out

5/8 in. OD 1/8 in. thick Magnet With Countersink for 6-32 Screw

$4.00 - $4.00
$4.00
$4.00
$4.00 - $4.00
$4.00
am-3892

This magnet is axial and countersunk for a #6 screw. Description Specifications Documentation This neodymium ring magnet is intended for u...

View full details
$4.00 - $4.00
$4.00
$4.00
$4.00 - $4.00
$4.00
Sold out
5/8 in. Rubber Grommet - am-1427 - migrated

5/8 in. Rubber Grommet

$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
am-1427

Grommets provide protection for wires passing through a hole in a panel by preventing sharp edges from cutting important cables. Description Sp...

View full details
$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
5/8 in. Six Point Combination Wrench - am-4141 - migrated

5/8 in. Six Point Combination Wrench

$8.50 - $8.50
$8.50
$8.50
$8.50 - $8.50
$8.50
am-4141

Description Specifications Documentation This 5/8 inch wrench features an open and closed end. This wrench can be used for holding Nubs w...

View full details
$8.50 - $8.50
$8.50
$8.50
$8.50 - $8.50
$8.50
5/8-18 Hex Jam Nut - am-1064 - migrated

5/8-18 Hex Jam Nut

$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20

am-1064

This nut fits air cylinders with nose mounts and 3/4 in. bores. Description Specifications Documentation All of our nose mount air cylind...

View full details
$1.20 - $1.20
$1.20
$1.20
$1.20 - $1.20
$1.20
50 Tooth 20 DP 0.375 in. Hex Bore Aluminum Gear - am-0143_2 - Image-2 - migrated
50 Tooth 20 DP 0.375 in. Hex Bore Aluminum Gear - am-0143_1 - Image-1 - migrated

50 Tooth 20 DP 0.375 in. Hex Bore Aluminum Gear

$19.00 - $19.00
$19.00
$19.00
$19.00 - $19.00
$19.00

am-0143

Description Specifications Documentation This part can replace the Large Cluster Gear on the Toughbox and save 0.28 Lbs. Bore: 0.3...

View full details
$19.00 - $19.00
$19.00
$19.00
$19.00 - $19.00
$19.00
50 Tooth 20 DP 0.375 in. Hex Bore Steel Gear - am-0149 - migrated

50 Tooth 20 DP 0.375 in. Hex Bore Steel Gear

$18.00
$18.00 - $18.00
$18.00
$9.00
$9.00 - $9.00
$9.00

am-0149

Description Specifications Documentation This gear is perfect for making 20 DP gear pairs. A 0.375 in. hex bore allows it for use with 0....

View full details
$18.00
$18.00 - $18.00
$18.00
$9.00
$9.00 - $9.00
$9.00
50 Tooth 20 DP 0.5 in. Hex Bore Aluminum Gear - am-0521 - migrated

50 Tooth 20 DP 0.5 in. Hex Bore Aluminum Gear

$20.00
$20.00 - $20.00
$20.00
$11.00
$11.00 - $11.00
$11.00

am-0521

Description Specifications Documentation This part can replace the steel Large Output Gear on the Toughbox, and save 0.28 Lbs. Bor...

View full details
$20.00
$20.00 - $20.00
$20.00
$11.00
$11.00 - $11.00
$11.00
50 Tooth 20 DP 0.5 in. Hex Bore Steel Gear - am-0150 - migrated
Save 42% Save %

50 Tooth 20 DP 0.5 in. Hex Bore Steel Gear

$22.00
$22.00 - $22.00
$22.00
$12.80
$12.80 - $12.80
$12.80
am-0150

Description Specifications Documentation This gear is perfect for making 20 DP gear pairs. A 0.5 in. hex bore allows it for use with 0.5 ...

View full details
$22.00
$22.00 - $22.00
$22.00
$12.80
$12.80 - $12.80
$12.80
Save 42% Save %
50 Tooth 20 DP 0.75 in. Hex Bore Steel Gear - am-2352 - migrated

50 Tooth 20 DP 0.75 in. Hex Bore Steel Gear

$17.00
$17.00 - $17.00
$17.00
$11.00
$11.00 - $11.00
$11.00

am-2352

Description Specifications Documentation Introducing FlexHub, designed by engineers from iR3 Creative Engineering, from Orlando, Florida....

View full details
$17.00
$17.00 - $17.00
$17.00
$11.00
$11.00 - $11.00
$11.00
50 Tooth 20 DP 1.125 in. Round Bore Steel Bolt Circle Bearing Gear - am-3209 - migrated
Save 56% Save %

50 Tooth 20 DP 1.125 in. Round Bore Steel Bolt Circle Bearing Gear

$24.00
$24.00 - $24.00
$24.00
$10.60
$10.60 - $10.60
$10.60
am-3209

This 50 tooth gear features the same six hole bole circle featured on AndyMark wheels. Description Specifications Documentation This gear...

View full details
$24.00
$24.00 - $24.00
$24.00
$10.60
$10.60 - $10.60
$10.60
Save 56% Save %
500 Bearing Hub - am-0160 - migrated

500 Bearing Hub

$19.50 - $19.50
$19.50
$19.50
$19.50 - $19.50
$19.50

am-0160

Description Specifications Documentation This part is designed and fabricated in Indiana, USA. Bolt Circle: 0.2 in. diamet...

View full details
$19.50 - $19.50
$19.50
$19.50
$19.50 - $19.50
$19.50
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS