Skip to content
If we sell it, it's here. Use our filter feature to narrow down what your looking for, or just keep scrolling to see all of our products.

Filters

$
$
Pronoun Pins - am-4030_Ask - Pronouns=Ask - migrated
Pronoun Pins - am-PronounPin_1 - Image-1 - migrated

Pronoun Pins

$10.50 - $10.50
$10.50
$10.50
$10.50 - $10.50
$10.50

7 Options available!

The official Rainbow STEM Alliance Pronoun Pin is an emamel coated, steel lapel pin with a variety of pronoun options. Description Specification...

View full details
$10.50 - $10.50
$10.50
$10.50
$10.50 - $10.50
$10.50
1/8 in. NPT Hex Head Plug - am-2024 - migrated

1/8 in. NPT Hex Head Plug

$3.80 - $3.80
$3.80
$3.80
$3.80 - $3.80
$3.80

am-2024

This is a brass plug for a 1/8 in. NPT port. Description Specifications Documentation NPT THREAD Note: NPT Thread Size is a nom...

View full details
$3.80 - $3.80
$3.80
$3.80
$3.80 - $3.80
$3.80
12 AWG Bonded Cable PP45 Powerpole to Bare Wire - am-2590 - migrated

12 AWG Bonded Cable PP45 Powerpole to Bare Wire

$8.50 - $8.50
$8.50
$8.50
$8.50 - $8.50
$8.50

am-2590

This kit allows the user to create whatever length cable is needed. Description Specifications Documentation This cable can be used in man...

View full details
$8.50 - $8.50
$8.50
$8.50
$8.50 - $8.50
$8.50
CAN Terminating Resistor - am-4111 - migrated

CAN Terminating Resistor

$0.19 - $0.19
$0.19
$0.19
$0.19 - $0.19
$0.19
am-4111

The CAN terminating resistor is used to terminate the can bus that the Talon SRX, Victor SRX, and other FRC components use to communicate. Descri...

View full details
$0.19 - $0.19
$0.19
$0.19
$0.19 - $0.19
$0.19
Climber in a Box Brace Upgrade Kits - am-4682 - migrated
Save up to 49% Save %

Climber in a Box Brace Upgrade Kits

$18.60 - $29.00
$18.60 - $29.00
$18.60
$10.60 - $14.90
$10.60 - $14.90
$10.60
2 Options available!

This is an upgrade kit for the Cliber in a Box. Description Specifications Documentation This kit is a tried and tested addition to the Cl...

View full details
$18.60 - $29.00
$18.60 - $29.00
$18.60
$10.60 - $14.90
$10.60 - $14.90
$10.60
Save up to 49% Save %
Hi-Tec Servo model HSR-1425CR - am-2587_2 - Image-2 - migrated
Hi-Tec Servo model HSR-1425CR - am-2587_1 - Image-1 - migrated
Save 25% Save %

Hi-Tec Servo model HSR-1425CR

$27.00
$27.00 - $27.00
$27.00
$20.25
$20.25 - $20.25
$20.25

am-2587

Manufactured by Hi-Tec RCD USA Model HSR-1425CR Specifications Documentation Free Speed: 44 RPM @ 4.8 V, 52 RMP @ 6 V Maximum Rotati...

View full details
$27.00
$27.00 - $27.00
$27.00
$20.25
$20.25 - $20.25
$20.25
Save 25% Save %
High Impact Polystyrene (HIPS) Pipe - am-4552 - Length=20 in., Color=Black, Nominal Pipe Size=3/4 in. (1.05 OD) - migrated
High Impact Polystyrene (HIPS) Pipe - am-HIPS-Pipe_1 - Image-1 - migrated
Save up to 72% Save %

High Impact Polystyrene (HIPS) Pipe

$2.20 - $5.10
$2.20 - $5.10
$2.20
$0.83 - $4.20
$0.83 - $4.20
$0.83
11 Options available!

These different lengths of pipe are made of High Impact Polystyrene (HIPS) tubing material. Description Specifications Documentation It i...

View full details
$2.20 - $5.10
$2.20 - $5.10
$2.20
$0.83 - $4.20
$0.83 - $4.20
$0.83
Save up to 72% Save %
Cable Tie Gun - am-2592a - migrated

Cable Tie Gun

$30.00 - $30.00
$30.00
$30.00
$30.00 - $30.00
$30.00
am-2592a

Description Specifications Documentation This cable tie gun is a must-have for cleaning up robot wiring. The cable tie gun tensions the c...

View full details
$30.00 - $30.00
$30.00
$30.00
$30.00 - $30.00
$30.00
Thermal Sticker 5 Pack - am-3225_5 - migrated
Save up to 25% Save %

Thermal Sticker 5 Pack

$8.00 - $14.90
$8.00 - $14.90
$8.00
$6.00 - $14.90
$6.00 - $14.90
$6.00

2 Options available!

The Thermal Sticker is designed to indicate the temperature of any surface that an operator might be concerned about getting hot. Description Sp...

View full details
$8.00 - $14.90
$8.00 - $14.90
$8.00
$6.00 - $14.90
$6.00 - $14.90
$6.00
Save up to 25% Save %
24 Tooth 0.5 in. Hex Bore 5 mm HTD 18 mm Wide Aluminum Pulley - am-4626 - migrated
Sold out

24 Tooth 0.5 in. Hex Bore 5 mm HTD 18 mm Wide Aluminum Pulley

$14.90 - $14.90
$14.90
$14.90
$14.90 - $14.90
$14.90

am-4626

Description Specifications Documentation This robust 5mm HTD 18mm wide aluminum pulley is a lightweight motion component thoughtfully des...

View full details
$14.90 - $14.90
$14.90
$14.90
$14.90 - $14.90
$14.90
Sold out
#35 Chain Break Replacement Bolt with Pin - am-1516 - migrated

#35 Chain Break Replacement Bolt with Pin

$7.90 - $7.90
$7.90
$7.90
$7.90 - $7.90
$7.90
am-1516

Description Specifications Documentation This bolt with pin is a replacement for the #35 chain break. This component does the work of pus...

View full details
$7.90 - $7.90
$7.90
$7.90
$7.90 - $7.90
$7.90
PWM Extension Cables - am-PWMCable_2 - Image-2 - migrated
PWM Extension Cables - am-PWMCable_1 - Image-1 - migrated

PWM Extension Cables

$2.20 - $2.70
$2.20
$2.20 - $2.70
$2.20 - $2.70
$2.20
3 Options available!

This is a PWM cable, also known as a "servo extension cable." Description Specifications Documentation 22 gauge wire is used in these cab...

View full details
$2.20 - $2.70
$2.20
$2.20 - $2.70
$2.20 - $2.70
$2.20
1/4 in. Fittings Male Pneumatic Plug - am-3981 - migrated

1/4 in. Fittings Male Pneumatic Plug

$3.40 - $3.40
$3.40
$3.40
$3.40 - $3.40
$3.40
am-3981

This small plug can be used to cap off open 1/4 in. pneumatic fittings. Description Specifications Documentation This handy little plug ca...

View full details
$3.40 - $3.40
$3.40
$3.40
$3.40 - $3.40
$3.40
1/8 in. ID 3/8 in. OD Black Surgical Tubing - am-3581-10 - Length=10 feet - migrated
1/8 in. ID 3/8 in. OD Black Surgical Tubing - am-3581_1 - Image-1 - migrated

1/8 in. ID 3/8 in. OD Black Surgical Tubing

$11.70 - $22.00
$11.70
$11.70 - $22.00
$11.70 - $22.00
$11.70
2 Options available!

Surgical Tubing is a highly flexible and grippy elastic tubing that is good for a variety of applications. Description Specifications Documenta...

View full details
$11.70 - $22.00
$11.70
$11.70 - $22.00
$11.70 - $22.00
$11.70
SDS MK4i Pinion Kits - am-4753 - Motor Type=Falcon - migrated
SDS MK4i Pinion Kits - am-4752 - Motor Type=NEO - migrated

SDS MK4i Pinion Kits

$24.00 - $26.00
$24.00
$24.00 - $26.00
$24.00 - $26.00
$24.00
3 Options available!

These Pinion Kits are used to allow NEO, Kraken, and Falcon Motors to interface with the SDS MK4i Modules. Description Specifications Document...

View full details
$24.00 - $26.00
$24.00
$24.00 - $26.00
$24.00 - $26.00
$24.00
Toughbox Classic Series 1/2 in. Output Shafts - am-0802a - Shaft Type=Hex, Size=Short - migrated
Toughbox Classic Series 1/2 in. Output Shafts - am-ToughboxClassicOutputShafts_1 - Image-1 - migrated
Save up to 54% Save %

Toughbox Classic Series 1/2 in. Output Shafts

$13.80 - $34.00
$13.80 - $34.00
$13.80
$10.60 - $15.90
$10.60 - $15.90
$10.60

4 Options available!

Description Specifications Documentation The keyed short steel output shaft is optional for the Toughbox® series gearboxes. This shaft in...

View full details
$13.80 - $34.00
$13.80 - $34.00
$13.80
$10.60 - $15.90
$10.60 - $15.90
$10.60
Save up to 54% Save %
CIMCoder 256 Hi-Resolution CIM Encoder - am-4027 - migrated

CIMCoder 256 Hi-Resolution CIM Encoder

$58.00 - $58.00
$58.00
$58.00
$58.00 - $58.00
$58.00

am-4027

The CIMCoder 256 is a high resolution version of the CIMcoder. Description Specifications Documentation The CIMCoder 256 is a high resolut...

View full details
$58.00 - $58.00
$58.00
$58.00
$58.00 - $58.00
$58.00
6 mm ID Spacer Tubing Stock And Tube Cutter - am-4129 - Option=Spacer Tubing Cutter - migrated
6 mm ID Spacer Tubing Stock And Tube Cutter - am-4137 - Option=Spacer Tubing Starter Bundle - migrated
Save up to 38% Save %

6 mm ID Spacer Tubing Stock And Tube Cutter

$2.40 - $10.60
$2.40 - $10.60
$2.40
$2.40 - $10.60
$2.40 - $10.60
$2.40
3 Options available!

This pair of tubing and tube cutter can create customized length spacers. Description Specifications Documentation The AndyMark Product De...

View full details
$2.40 - $10.60
$2.40 - $10.60
$2.40
$2.40 - $10.60
$2.40 - $10.60
$2.40
Save up to 38% Save %
CAN Connector Board - am-4130_2 - Image-2 - migrated
CAN Connector Board - am-4130_1 - Image-1 - migrated

CAN Connector Board

$5.90 - $5.90
$5.90
$5.90
$5.90 - $5.90
$5.90
am-4130

This connector board is designed to join together two CAN devices in series. Description Specifications Documentation Designed to join to...

View full details
$5.90 - $5.90
$5.90
$5.90
$5.90 - $5.90
$5.90
Insulated Terminals Crimp Tool - am-2215 - migrated

Insulated Terminals Crimp Tool

$72.00 - $72.00
$72.00
$72.00
$72.00 - $72.00
$72.00

am-2215

Description Specifications Documentation This is a crimping tool for 2 piece insulated terminals and connectors with a single crimp or a ...

View full details
$72.00 - $72.00
$72.00
$72.00
$72.00 - $72.00
$72.00
Magnetic Nutsetters - am-2754 - Size=5/16 in. - migrated
Magnetic Nutsetters - am-Nutsetter_1 - Image-1 - migrated

Magnetic Nutsetters

$6.40 - $29.00
$6.40
$6.40 - $29.00
$6.40 - $29.00
$6.40

5 Options available!

These Magnetic Nutsetters easily fit into a drill or power screwdriver with a standard 1/4 in. hex. Description Specifications Documentation ...

View full details
$6.40 - $29.00
$6.40
$6.40 - $29.00
$6.40 - $29.00
$6.40
10-32 x 3 in. Socket Head Cap Screw - am-1522 - migrated
Save 48% Save %

10-32 x 3 in. Socket Head Cap Screw

$2.10
$2.10 - $2.10
$2.10
$1.10
$1.10 - $1.10
$1.10
am-1522

Description Specifications Documentation This screw has a 10-32 thread and is 3 in. long. If you found this page due to a small typo in a...

View full details
$2.10
$2.10 - $2.10
$2.10
$1.10
$1.10 - $1.10
$1.10
Save 48% Save %
Robot Power Cable Kit, custom lengths up to 36 in. - am-RbtPwrCblKit_1 - Image-1 - migrated

Robot Power Cable Kit, custom lengths up to 36 in.

$82.00 - $97.00
$82.00
$82.00 - $97.00
$82.00 - $97.00
$82.00
182 Options available!

Description Specifications Documentation Everyone's Robot is different, this lets you customize the wire gauge, jacket type and lengths...

View full details
$82.00 - $97.00
$82.00
$82.00 - $97.00
$82.00 - $97.00
$82.00
RedLine Encoder Kit - am-3773a - migrated

RedLine Encoder Kit

$55.00 - $55.00
$55.00
$55.00
$55.00 - $55.00
$55.00
am-3773a

The RedLine Encoder Kit is designed to adapt the AM Mag Encoder(am-3479) onto the back shaft of the RedLine Motor. Description Specifications D...

View full details
$55.00 - $55.00
$55.00
$55.00
$55.00 - $55.00
$55.00
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS