Skip to content
If we sell it, it's here. Use our filter feature to narrow down what your looking for, or just keep scrolling to see all of our products.

Filters

$
$
JST VH 2-pin Connector Board - am-5203 - migrated

JST VH 2-pin Connector Board

$2.70 - $2.70
$2.70
$2.70
$2.70 - $2.70
$2.70
am-5203

Using this small board, two JST VH 2-pin Cables can be combined to create a longer cable. Description Specifications Documentation Using t...

View full details
$2.70 - $2.70
$2.70
$2.70
$2.70 - $2.70
$2.70
M4-0.7 x 30 mm Socket Head Cap Screw - am-1533 - migrated Save 34% Save %

M4-0.7 x 30 mm Socket Head Cap Screw

$0.32
$0.32 - $0.32
$0.32
$0.21
$0.21 - $0.21
$0.21
am-1533

This M4x0.7 screw is 30 mm long. Specifications Documentation Drive: 3 mm Hex Finish: Zinc Head: Socket Cap Length: 30 mm Materi...

View full details
$0.32
$0.32 - $0.32
$0.32
$0.21
$0.21 - $0.21
$0.21
Save 34% Save %
Short Spring Plunger with Extended Travel - am-1579 - migrated

Short Spring Plunger with Extended Travel

$8.50 - $8.50
$8.50
$8.50
$8.50 - $8.50
$8.50
am-1579

This is a self-contained plunger-and-spring device that is 0.5 in. long. Description Specifications Documentation Install and/or adjust ...

View full details
$8.50 - $8.50
$8.50
$8.50
$8.50 - $8.50
$8.50
2 Stage EVO Slim Cluster Shaft - am-3814 - migrated

2 Stage EVO Slim Cluster Shaft

$11.70 - $11.70
$11.70
$11.70
$11.70 - $11.70
$11.70
am-3814

This cluster shaft is used in the 2 Stage EVO slim single speed gearboxes. Specifications Documentation Hex width: 0.375 in. Material:...

View full details
$11.70 - $11.70
$11.70
$11.70
$11.70 - $11.70
$11.70
Micro SD to USB Reader - am-5292_2 - Image-2 - migrated
Micro SD to USB Reader - am-5292_1 - Image-1 - migrated

Micro SD to USB Reader

$3.50 - $3.50
$3.50
$3.50
$3.50 - $3.50
$3.50
am-5292

Description Specifications Documentation This is an incredibly easy way to connect a microSDHC memory card to a computer through a USB po...

View full details
$3.50 - $3.50
$3.50
$3.50
$3.50 - $3.50
$3.50
1 Hole x 1 Hole Bracket - am-5594 - migrated

1 Hole x 1 Hole Bracket

$1.90 - $1.90
$1.90
$1.90
$1.90 - $1.90
$1.90
am-5594

This is a handy-dandy generic bracket that is compatible with 0.5 in. pitch hole patterns. Specifications Documentation Finish: Tumbled ...

View full details
$1.90 - $1.90
$1.90
$1.90
$1.90 - $1.90
$1.90
FTC-M100 Matrix FTC Challenge Set - am-2949 - migrated

FTC-M100 Matrix FTC Challenge Set

$907.00 - $907.00
$907.00
$907.00
$907.00 - $907.00
$907.00
am-2949

This MATRIX® FTC Challenge Set has over 700 MATRIX parts and comes with the AndyMark® NeveRest Motors. Description Specifications Documentation...

View full details
$907.00 - $907.00
$907.00
$907.00
$907.00 - $907.00
$907.00
Peanut Drill Guide - am-4021 - migrated

Peanut Drill Guide

$21.00 - $21.00
$21.00
$21.00
$21.00 - $21.00
$21.00
am-4021

This guide provides proper alignment for drilling into Peanut Extrusion. Description Specifications Documentation Our Peanut Extrusion (am-30...

View full details
$21.00 - $21.00
$21.00
$21.00
$21.00 - $21.00
$21.00
NeveRest Hex Gearmotors - am-5550_0100_001 - migrated

NeveRest Hex Gearmotors

$35.00 - $47.00
$35.00
$35.00 - $47.00
$35.00 - $47.00
$35.00

16 of 18 Options available!

The NeveRest Hex gearmotor is our newest planetary gearmotor designed for FTC. Description Specifications Documentation The NeveRest Hex ...

View full details
$35.00 - $47.00
$35.00
$35.00 - $47.00
$35.00 - $47.00
$35.00
M4-0.7 x 35 mm Black Oxide Button Head Cap Screw - am-1441 - migrated
Save 54% Save %

M4-0.7 x 35 mm Black Oxide Button Head Cap Screw

$0.35
$0.35 - $0.35
$0.35
$0.16
$0.16 - $0.16
$0.16
am-1441

This is a button head cap screw that is 35 mm long with a black oxide finish. Specifications Documentation Diameter: M4 Drive: 2.5 mm...

View full details
$0.35
$0.35 - $0.35
$0.35
$0.16
$0.16 - $0.16
$0.16
Save 54% Save %
Needle Bearing Thrust Washer - am-1534 - migrated
Save 46% Save %

Needle Bearing Thrust Washer

$2.40
$2.40 - $2.40
$2.40
$1.30
$1.30 - $1.30
$1.30
am-1534

Description Specifications Documentation This washer is intended to be used to create a thrust bearing, where two washers are used with n...

View full details
$2.40
$2.40 - $2.40
$2.40
$1.30
$1.30 - $1.30
$1.30
Save 46% Save %
0.375 in. ID 0.500 in. OD x 1.500 in. Aluminum Spacer - am-1590-1500 - migrated
Save 50% Save %

0.375 in. ID 0.500 in. OD x 1.500 in. Aluminum Spacer

$2.80
$2.80 - $2.80
$2.80
$1.40
$1.40 - $1.40
$1.40
am-1590-1500

This spacer is designed to fit on a shaft or screw that is 0.375 in. in diameter. Description Specifications Documentation Spacers help k...

View full details
$2.80
$2.80 - $2.80
$2.80
$1.40
$1.40 - $1.40
$1.40
Save 50% Save %
36 Tooth 20 DP 0.875 in. Round Bore Steel Dog Pattern Gear - am-3539_2 - Image-2 - migrated
36 Tooth 20 DP 0.875 in. Round Bore Steel Dog Pattern Gear - am-3539_1 - Image-1 - migrated
Save 47% Save %

36 Tooth 20 DP 0.875 in. Round Bore Steel Dog Pattern Gear

$24.00
$24.00 - $24.00
$24.00
$12.80
$12.80 - $12.80
$12.80

am-3539

Specifications Documentation Bore: 0.875 in. Round Diametral Pitch: 20 Face Width: 0.438 in. Finish: Zinc Plated Material: 4140...

View full details
$24.00
$24.00 - $24.00
$24.00
$12.80
$12.80 - $12.80
$12.80
Save 47% Save %
DIY Button Board - am-3753b - migrated

DIY Button Board

$48.00 - $48.00
$48.00
$48.00
$48.00 - $48.00
$48.00
am-3753b

This bundle includes numerous inputs, a computer interface, and every wire needed to connect it all up. Description Specifications Documentatio...

View full details
$48.00 - $48.00
$48.00
$48.00
$48.00 - $48.00
$48.00
Male to Female Jumper Cables (10 Pack) - am-4451_2 - Image-2 - migrated
Male to Female Jumper Cables (10 Pack) - am-4451_1 - Image-1 - migrated

Male to Female Jumper Cables (10 Pack)

$6.90 - $6.90
$6.90
$6.90
$6.90 - $6.90
$6.90
am-4451

Description Specifications Documentation These male to female jumper cables are just what you needed for breadboard or custom electronics...

View full details
$6.90 - $6.90
$6.90
$6.90
$6.90 - $6.90
$6.90
10-32 x 1.75 in. Hex Washer Head Screw - am-1491 - migrated
Save 53% Save %

10-32 x 1.75 in. Hex Washer Head Screw

$0.34
$0.34 - $0.34
$0.34
$0.16
$0.16 - $0.16
$0.16
am-1491

10-32 x 1.75 in. Hex-Slotted Drive Screw. Description Specifications Documentation Machine thread type is used in a pre-tapped hole with ...

View full details
$0.34
$0.34 - $0.34
$0.34
$0.16
$0.16 - $0.16
$0.16
Save 53% Save %
0.313 in. ID 0.438 in. OD 0.438 in. Long Aluminum Spacer - am-1688 - migrated

0.313 in. ID 0.438 in. OD 0.438 in. Long Aluminum Spacer

$1.30 - $1.30
$1.30
$1.30
$1.30 - $1.30
$1.30
am-1688

This Aluminum spacer is 0.438 inches long and has an inside diameter of 0.313 inches. Specifications Documentation Inside Diameter: 0.31...

View full details
$1.30 - $1.30
$1.30
$1.30
$1.30 - $1.30
$1.30
FRC Basic Starter Bundle - am-4725_X - Option=Without roboRIO - migrated
FRC Basic Starter Bundle - am-4101_X - Option=With roboRIO - migrated
Sold out

FRC Basic Starter Bundle

$2,596.00 - $3,058.00
$2,596.00
$2,596.00 - $3,058.00
$2,596.00 - $3,058.00
$2,596.00
0 of 2 Options available!

This bundle is intended for anyone involved in FIRST Robotics Competition. Description Specifications Documentation Customers who are no...

View full details
$2,596.00 - $3,058.00
$2,596.00
$2,596.00 - $3,058.00
$2,596.00 - $3,058.00
$2,596.00
Sold out
5 mm Hex Servo Hub - am-5439 - migrated

5 mm Hex Servo Hub

$9.60 - $9.60
$9.60
$9.60
$9.60 - $9.60
$9.60
am-5439

The 5 mm Hex Servo Hub is a great way to mount components to our AndyMark Programmable Servos. Description Specifications Documentation T...

View full details
$9.60 - $9.60
$9.60
$9.60
$9.60 - $9.60
$9.60
DIY Orbit Odyssey Field Kit - am-5620 - migrated

DIY Orbit Odyssey Field Kit

$52.00 - $52.00
$52.00
$52.00
$52.00 - $52.00
$52.00
am-5620

This DIY Kit is everything that is needed for the Orbit Odyssey field, excluding the 3D printed parts. Description Specifications Documentation...

View full details
$52.00 - $52.00
$52.00
$52.00
$52.00 - $52.00
$52.00
0.290 in. ID 0.550 in. OD 0.063 in. Long Steel Spacer For Falcon 500 Shaft - am-1538 - migrated

0.290 in. ID 0.550 in. OD 0.063 in. Long Steel Spacer For Falcon 500 Shaft

$0.47 - $0.47
$0.47
$0.47
$0.47 - $0.47
$0.47
am-1538

This spacer is included with the Falcon 500 Spline to 1/2 inch Hex Shaft Adapter. Description Specifications Documentation This 1/16 in. t...

View full details
$0.47 - $0.47
$0.47
$0.47
$0.47 - $0.47
$0.47
6-32 x 0.375 in. Hex Head Thread Lock Screws for Nubs - am-1562 - migrated

6-32 x 0.375 in. Hex Head Thread Lock Screws for Nubs

$0.23 - $0.23
$0.23
$0.23
$0.23 - $0.23
$0.23
am-1562

These hex head 6-32 screws can be driven with a 1/4 inch driver and the thread patch keeps them from vibrating loose. Description Specifications...

View full details
$0.23 - $0.23
$0.23
$0.23
$0.23 - $0.23
$0.23
PicoBox Twin Turbo - am-3450 - migrated

PicoBox Twin Turbo

$140.00 - $140.00
$140.00
$140.00
$140.00 - $140.00
$140.00
am-3450

With the Twin Turbo, you use two motors which means double the torque and double the power. Description Gearbox Ratios Specifications Docum...

View full details
$140.00 - $140.00
$140.00
$140.00
$140.00 - $140.00
$140.00
EVO Shifter Shift Assembly - am-3451 - migrated
Save 49% Save %

EVO Shifter Shift Assembly

$25.00
$25.00 - $25.00
$25.00
$12.80
$12.80 - $12.80
$12.80
am-3451

This shift assembly is what helps the shifting action happen on the EVO Shifter Specifications Documentation

$25.00
$25.00 - $25.00
$25.00
$12.80
$12.80 - $12.80
$12.80
Save 49% Save %
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS