PicoBox Duo - am-3448 - migrated

PicoBox Duo

by AndyMark

Save 50%

$148.00

$148.00 - $148.00

$148.00

$74.00

$74.00 - $74.00

$74.00

The PicoBox Duo is a single reduction, double motor input gearbox that utilizes steel 32DP gears.

Description
Gearbox Ratios
Specifications
Documentation

The PicoBox gearboxes are designed specifically for FIRST Tech Challenge teams. These highly configurable gearboxes are a robust solution for teams to make fine adjustments to the output speed and torque of drivetrains, mechanisms and more. All PicoBox gearboxes are designed to work with other building systems that FIRST Tech Challenge teams are familiar with, because they are built to work around a base 16 mm center-to-center hole pattern. The flanges on the PicoBox gearboxes are reversible while maintaining a base 16 mm hole pattern. Additionally, all PicoBox gearboxes utilize the same plate design as both the input plate and output plate, allowing for different configurations such as mounting the motor and output shaft onto the same side of the gearbox.

This gearbox accepts two NeveRest Classic gearmotors as its input, and has a robust steel 6 mm D shaft for it's output. The motors can be installed on each side of the output shaft, or the motors can be installed side by side with the output shaft installed on one of the ends of the gearbox.

Gear Ratios:
The kit comes with 3 different gear ratio options, so that you can experiment and understand how changing the gear ratio affects driving performance.
- 45 Tooth and 35 Tooth gear combination yields a 1:0.78 overdrive
- Two 40 Tooth gears yield a 1:1 ratio
- 35 Tooth and 45 Tooth gear combination yields a 1:1.28 reduction
Motor Input:
The PicoBox Uno is not compatible with the NeveRest Motor Only or NeveRest Orbital line, as the PicoBox Duo requires the use of the NeveRest gearbox as part of the motor input assemblies. The PicoBox Duo accepts up to two of the following motors at a time:
- NeveRest Classic 40 (am-2964a)
- NeveRest Classic 60 (am-3103)
Ratios:

If there is no table above this line please email support@andymark.com
Product Usage:
All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short runtimes in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thorough grease of the gear teeth periodically to ensure smooth operation.

Individual Components within Kit
If you need the output shaft to be a 1/2 in. Hex, check out the 6 mm D to 0.5 in. Hex-Shaft Adapter (am-3744a)
- Motor Input: NeveRest Classic
- Motor Quantity: 1, 2
- Ratio: 1:0.78, 1:1, 1:1.28
- Weight: ~ 1.25 lbs.
CAD Files
am-3448 PicoBox Duo REV2.STEP
Guides
am-3448 PicoBox Duo User Guide.pdf
Layout Prints
am-3448 PicoBox Duo Layout REV2.PDF

Purchase options

Select a purchase option to pre order this product

Countdown header
Countdown message

DAYS

:

HRS

:

MINS

:

SECS