Skip to content
AndyMark will be closed on Fridays through August 1st to allow staff flexible summer work hours.
AndyMark will be closed on Fridays through August 1st to allow staff flexible summer work hours.
DuraOmni Wheel - am-DuraOmni_1 - Image-1 - migrated

DuraOmni Wheel

by AndyMark
Save up to 20% Save %
$28.00 - $40.00
$28.00 - $40.00
$28.00
$22.40 - $32.00
$22.40 - $32.00
$22.40
This Heavy Duty DURAble omni wheel has been totally redesigned with durability and mobility in mind.
Choose a Diameter
SKU
  • Description
  • Specifications
  • Documentation
  • This Heavy Duty DURAble omni wheel is a vast improvement over our older 6 in. omni wheels and other wheels on the market. The body has been totally redesigned with durability and mobility in mind. The design intent is to provide a smooth roll along with the ability to handle impacts very well.

    The body is made from black polycarbonate, while the rollers are each molded with a nylon core and TPU tread. These rollers spin smoothly on a captured dowel pin.

    Usage With Axle and Hub:
    • If you wish to drive this wheel with an axle and hub, you can pick your hub by fitting any of the AndyMark hubs to this wheel. Hubs are not included with this wheel. If this is your choice, then no bearing is needed. To install a hub onto this wheel, use #10-24x3/4 thread forming screws.

    Usage With Sprockets and Bearings:

    • If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel with #10-24x3/4 thread forming screws. You will also need to press ball bearings into the wheel so that it may spin on a shaft or bolt. The ball bearing must have a 1.125 in. od. For a 1/2 in. shafts, use am-0181. For a 3/8 in. shafts use am-0209.
    • Weight: 4 in. 0.59 Lbs.,6 in. 0.99 lbs

  • CAD Files

    am-3047 4inDuraOmniV2.STEP
    am-3154 6in DuraOmni.STEP

    Layout Prints

    am-3047 4inDuraOmniLayout.PDF
    am-3154 6in DuraOmni Layout.PDF

Customer Reviews

Based on 12 reviews
92%
(11)
8%
(1)
0%
(0)
0%
(0)
0%
(0)
G
GV from EXPORT
Smooth but...

This wheel rolls nicely in both directions. It is however quite a bit wider than standard drive base wheels. If installing these on a standard drive base they just barely fit and you will need to shorten the nylon bushings to make room.

C
CS from LUDINGTON
Essential wheel on tank drive robots

we have ran these wheels for a couple years. They have held up well for us.

C
CS from LUDINGTON
DuraOmni Wheels

During the short season we used the 6' DuraOmni on our West Coast Drive 8 wheel Chassis. We put them on the back to allow for smooth turning. During the 2021 season, the field obstacles are gone, so we are now running 6 of the 8 wheels as omnis. This has substantial improved turning performance. I would recommend these to eliminate turning difficulties.

W
WA
delivery was quick and painless.Got the bear...

delivery was quick and painless.
Got the bearings it needs in the same shipment. Looks good.

A
AK from Los Angeles
Recommend

Great quality and excellent value and service.

123
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS