Skip to content
6 in. HiGrip Wheel Rev2 - am-0940a - migrated

6 in. HiGrip Wheel Rev2

by AndyMark
Sold out
$12.00 - $12.00
$12.00
$12.00
$12.00 - $12.00
$12.00
SKU am-0940a
  • Description
  • Specifications
  • Documentation
  • Product Overview:
     HiGrip wheels provide superior traction for robot movement. HiGrip wheels feature an aggressive tread pattern providing maximum transfer of gearbox power to the ground. A robust polycarbonate core means these wheels are up to the challenge for high impact and speed applications. Varying durometers mean you can choose just how grippy these wheels can be. White or 80A durometer HiGrip wheels have a long life and provide good traction. Black or 60A durometer HiGrip wheels have an intermediate life and higher grip than white. Blue or 60A durometer HiGrip wheels provide the most traction and will wear quickly as a result. The bolt pattern and bore of these wheels allow for convenient bearing placement and easy attachment to other motion parts such as sprockets and pulleys.

    Product Usage:
    Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product. This link will allow you to check which materials are okay to use with what adhesives, https://bit.ly/loctitematerialcheck


    Usage:
    Use #10-24x3/4 thread forming screws to attach sprockets or hubs to this wheel. Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product. This link will allow you to check which materials are okay to use with what adhesives, https://bit.ly/loctitematerialcheck

    With Axle and Hub:
    • If you wish to drive this wheel with an Axle and Hub, you can pick your hub by fitting any of the AndyMark hubs (not included) to this wheel. If this is your choice, then no bearing is needed. Use #10-24x3/4 thread forming screws to fasten a hub to this wheel.
    With Sprocket:
    • If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel, and two ball bearings need to be pressed into the wheel (one on each side). The ball bearing must have a 1.125 in. od. For a 1/2 in. id, use am-0181 or am-0029. For a 3/8 in. id, use am-0209. Use #10-24x3/4 thread forming screws to fasten the sprocket to the wheel.
    With Bearings:
    • To press bearings into this wheel (for a free spinning wheel or for use with a sprocket), two ball bearings need to be pressed into the wheel (one on each side). The ball bearing must have a 1.125 in. od. For a 1/2 in. id, use am-0181 or am-0029. For a 3/8 in. id, use am-0209.
    • Bolt Pattern: Six holes (0.17 in. diameter) on a 1.875 in. diameter bolt circle
    • Bore: 0.95 in. diameter through hole, with two 1.125 in. diameter bearing pockets
    • CoF: 0.95 - 1.0 static (on tight pile carpet)
    • CoF On Hdpe: 0.31
    • Diameter: 6 in.
    • Load Capacity: 90 lbs.
    • Material: Black Polycarbonate, TPU rubber, 80A durometer
    • Side Load: In excess of 600 lbs. at tread surface
    • Weight: 0.5 lbs.

  • Layout Prints

    am-0940a 6 HiGrip Asm REV2.PDF

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
J
JA from Allenton
Review

5 Stars

L
LM from Uniontown
Delivery to Pit

Thank you so much for making sure our parts were delivered for the meet. As always, we are very pleased with our purchase. Thank you!!!!

A
AB from Windsor
Long Wait for parts!

Wheels were great but it took 3 weeks to be delivered!

C
Cr from Upsala
Thumbs Up

Standard 6' wheel similar to past kits, durable, good tread, and holds up well.

R
RB from Auburn
'Weight'

'The weight is not there '0.' does not help.'

12
Purchase options
Select a purchase option to pre order this product
Countdown header
Countdown message


DAYS
:
HRS
:
MINS
:
SECS