AndyMark Version of FRC Kit of Parts

am-3576_2025 - AndyMark Version of FRC 2025 Kit of Parts Kickoff Kit

• 1 - am-3576_25BT - AndyMark Version of FRC 2025 Kit of Parts - Black Tote
  • Teams were able to opt out of this in exchange for $250 in vouchers (contents listed below)
  • KitBot items are included in this tote
• 1 - am-3576_25GT - AndyMark Version of FRC 2025 Kit of Parts - Gray Tote (aka Rookie Tote)
  • Only New (“rookie”) teams receive this Tote (contents listed below)
• 1 - am-3576_25DB - AndyMark Version of FRC 2025 Kit of Parts - Drive Base Kit
  • Veteran teams could opt out for a Voucher from AndyMark (contents listed below)
• 1 - am-3576_25SS - AndyMark Version of FRC 2025 Kit of Parts - Season Specific
  • All teams received this for the 2025 season (contents listed below)

am-3567_25BT - Black Tote only
AndyMark Version of FRC 2025 Black Tote - Compare to Official list

• 1 - Black Electrical Tape (am-3582_Black)
• 1 - Red Electrical Tape (am-3582_Red)
• 1 - Battery Power Cable Custom Length, 22 inches (am-0339_22) - *replaces 6 AWG wire
• 1 - Surface Mount 120A Breaker by Eaton Bussmann (am-0282a)
• 1 - 25 ft 12 Gauge Bonded Silicone Jacketed Wire (am-4698-25) - *25ft instead of 15ft
• 2 - 18 gauge red black bonded wire 5ft length (am-3082_wire)
• 1 - 0.625 in. Wide 30 in. Long Constant Force Spring (am-4657)
• 1 - 0.5 in. Wide 30 in. Long Constant Force Spring (am-4666)
• 1 - Black CatTongue Gription Tape (am-5627)
• 10 - WAGO 221 Series InLine Splicing Connector with Lever (am-4728)
• 2 - 20 Amp Snap Action Breaker (am-0289)
• 2 - 30 Amp Snap Action Breaker (am-0290)
• 6 - 40 Amp Snap Action, AT2 Breaker (am-4947)
• 2 - Spark MAX Motor Controller (am-4261)
• 1 - 5 ft. Black Ethernet Cable (am-3845)
• 1 - Locking PWM Wire / Cable Making Kit (am-5483)
• 1 - 2-Pin Locking Cable Making Kit (am-5506)
• 1 - 6 Gauge 12 Inch PVC Insulated Battery Cable (am-0009)
• 1 - 2.5 in. CIM Motor (am-0255) - *a 2nd is included in the KitBot line item
• 1 - MK Battery, ES17-12 (1/2 of am-0844)
• 1 - 1/2 in. Wide 36 yd long VHB Foam Mounting Tape 3M VHB 4941 (am-5297)
• 1 - AM Robot Signal Light (am-3583)
• 1 - 2025 KitBot with non-drilled extrusion (am-5595) - *replaced many items on the list for the KitBot

Items NOT in the AM version:

• Hex to 3D print Adapter Pack of 4 pieces - WCP-1121 - *These are not needed for the AM version of KitBot
• Kitbot Radio Mount Bracket - KB-25014-2 - *Can be printed from provided files

am-3576_25GT - Gray Tote
AndyMark Version of FRC 2025 Gray Tote - Compare to Official list

• 1 - 574 ml Air Reservoir with Push Connect Fittings (am-2649)
• 2 - Logitech Controller F310 (am-2064)
• 1 - Pneumatic Control Module (am-2858)
• 1 - REV Power Distribution Hub (am-5608)
• 1 - Voltage Regulator Module (am-2857)
• 1 - NOCO Battery Charger 1 Bank with SB50 Connectors (am-4968_1)
• 4 - 2.5 in. CIM Motor (am-0255)
• 1 - MK Battery, ES17-12 (1/2 of am-0844)
• 1 - NI roboRIO 2.0 (am-3000a)
• 3 - 6 Gauge 12 Inch PVC Insulated Battery Cable (am-0009)
• 1 - Bumper Material Cordura Red 160 in. x 20 in. (+/- 2 in.) (am-2675)
• 1 - Bumper Material Cordura Blue 160 in. x 20 in. (+/- 2 in.) (am-2676)
• 1 - Viair 90C Air Compressor (am-2005)
• 1 - REV NEO Brushless Motor V1.1 (am-4258a)
• 4 - REV SPARK MAX Brushless and Brushed DC Motor Controller (am-4261)
• 1 - navX2 MXP Robotics Navigation Sensor (am-3060c)
• 1 - Black Electrical Tape (am-3582_Black)
• 1 - USB 2.0 to Ethernet Adapter (am-3580) - *does not include extra USB ports
• 2 - 3 in. Stealth Wheel 1/2 in. Hex Bore Orange 40A Durometer (am-4716_orange)
• 2 - 3 in. Compliant Wheel 1/2 in. Hex Bore Green 35A Durometer (am-3945_green)
• 1 - 6 Foot USB A to USB B 2.0 Cable (am-3579)
• 8 - 6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX (am-0805)
• 2 - 36 in. Locking CAN Cable (am-5210-3600)
• 5 - 36 in. PWM Extension Cables (am-0695b)
• 150 - WAGO 221 Series InLine Splicing Connector with Lever (am-4728) - *replaces many individual electrical connectors
• 1 - CKD Double Solenoid Valve (am-2343a)
• 3 - Pneumatic Fitting Straight 1/4 in. Tube to Thread M5 Male (am-2384)
• 1 - Norgren Regulator and Bracket (am-2020)
• 1 - REV Analog Pressure Sensor (am-3219)
• 100 - Cable Ties 4 in. (am-1589_natural)
• 100 - Cable Tie 8 in. (am-1552_natural)
• 2 - Pressure Gauge 0-160 psi (am-3147a)
• 1 - Micro SD to USB Reader (am-5292)
• 1 - Pneumatic Reservoir Bracket (am-2008)
• 1 - Heat Shrink Kit Red and Black 198 Pieces (am-4767)
• 1 - Pneumatic Fittings Kit (am-2678) - *replaces many individual pneumatic fittings

Items NOT in the AM version:

• Netbook HP - BB22252434 - *Find a laptop that works well for you

am-3576_25DB - Drive Base
AndyMark Version of FRC 2025 Drive Base - Compare to Official list

• 1 - AM14U6 - 6 Wheel Drop Center Robot Drive Base - 2025 FRC Kit of Parts Drive Base (am-14u6_846)
• 1 - AM14U Family Vertical Battery Tray (am-3964a)
• 1 - AM14U Family Bumper Brackets and Fasteners Kit (am-3966)

am-3576_25SS - Season Specific
AndyMark Version of FRC 2025 Season Specific - Compare to Official list

• 2 - Sticker Pack of 4 (am-4634)
• 1 - Vivid-Hosting VH-109 FRC Radio (am-5583)
• 2 - REEFSCAPE℠ Game Piece 2, Algae (am-5602)
• 2 - REEFSCAPE℠ Game Piece 1, Coral (am-5601)
• 1 - Robits Ruler (am-5025)