AndyMark Version of FRC Kit of Parts

am-3576_2026 - AndyMark Version of FRC 2026 Kit of Parts Kickoff Kit

• 1 - am-3576_26BT - AndyMark Version of FRC 2026 Kit of Parts - Black Tote

Veteran teams were able to opt out of the official version of this in exchange for $250 in vouchers (contents listed below)

• 1 - am-3576_26GT - AndyMark Version of FRC 2026 Kit of Parts - Gray Tote (aka Rookie Tote)

Only New (“rookie”) teams receive an official version of this Tote (contents listed below)

• 1 - am-3576_26DB - AndyMark Version of FRC 2026 Kit of Parts - Drive Base Kit

Veteran teams could opt out of the official version of this in exchange for a Voucher from AndyMark (contents listed below)

• 1 - 10 Pack Qty of Official REBUILT™ FUEL (am-5801_kop)

am-3576_26BT - Black Tote only
AndyMark Version of FRC 2026 Black Tote - Compare to Official list

• 1 - Black Electrical Tape (am-3582_Black)
• 1 - Red Electrical Tape (am-3582_Red)
• 1 - Battery Power Cable Custom Length, 22 inches (am-0339_22) - *replaces 6 AWG wire
• 1 - 25 ft of 12 Gauge Bonded Silicone Jacketed Wire (am-4698-25) - *25ft instead of 15ft
• 2 - 5 ft of 18 gauge red black bonded wire (am-3082_wire)
• 1 - Surface Mount 120A Breaker by Eaton Bussmann (am-0282a)
• 1 - Black CatTongue Gription Tape (am-5627)
• 2 - 2 x 2 x 10 mm Machine Key (am-1121)
• 2 - 8 mm Push On Retaining Ring (am-0033)
• 4 - 10-32 x 0.625 in. Socket Head Cap Screw with Nylon Thread Lock Patch (am-1120)
• 40 - WAGO 221 Series InLine Splicing Connector with Lever (am-4728)
• 2 - 20 Amp Snap Action Breaker (am-0289)
• 2 - 30 Amp Snap Action Breaker (am-0290)
• 6 - 40 Amp Snap Action, AT2 Breaker (am-4947)
• 2 - 4 in., 1/2 in. Hex Bore, 40A Durometer Stealth Wheel (am-2647_orange)
• 3 - Hook and Loop Adhesive Backed 2 in. Wide x 5 ft. Long (am-3569a_05)
• 1 - 1/2 in. Wide 36 yd long VHB Foam Mounting Tape 3M VHB 4941 (am-5297)
• 2 - 2.5 in. CIM Motor (am-0255)
• 1 - AM Robot Signal Light (am-3583)
• 1 - 6 Gauge 12 Inch PVC Insulated Battery Cable (am-0009)
• 1 - MK Battery, ES17-12 (1/2 of am-0844)
• 1 - 5 ft. Black Ethernet Cable (am-3845)
• 1 - Locking PWM Wire / Cable Making Kit (am-5483)
• 1 - 2-Pin Locking Cable Making Kit (am-5506)
• 2 - Spark MAX Motor Controller (am-4261)
• 1 - 8 mm to 1/2 in. Hex Shaft Adapter (am-0588_long)
• 4 - 17.80 in. long, 1/2 in. Churro (am-3101-1780)
• 1 - Transparent 24 in. x 24 in. Polycarbonate Sheets, 0.030 in. thick (am-0983)
• 1 - 55 Tooth 15 mm Wide 5 mm Pitch HTD Timing Belt (am-5215_55T)
• 2 - 0.500 in. Hex Bore 24T Plastic HTD Pulley (am-3403)
• 12 - 2 in. Diameter, 1/2 in. Hex Bore, 60A Durometer Compliant Wheel (am-3462_black)
• 8 - 1/2 in. Hex ID 1.125 in. OD Shielded Flanged Bearing (FR8ZZ-HexHD) (am-2986)
• 4 - 1/2 in. Steel Hex Shaft Stock - 47 in. Long (am-0856-4700)
• 12 - 1 Part, 1/2 in. Hex Bore, 1/2 in. Thick Collar Clamp (am-1526)
• 1 - 105 Tooth 15 mm Wide 5 mm Pitch HTD Timing Belt (am-5215_105T)
• 1 - Flywheels for 4 in. Stealth Wheel (am-4685)
• 1 - 1 Part, 3/8 in. Round Bore, 0.25 in. Thick Collar Clamp (am-1647)

KITBOT Specific Items NOT in the AM version:

• WCP-0235, WCP-0899, WCP-1439, KB-26010, REV-21-2705-PK4, KB-26016, KB-26008, KB-26001, KB-26003, KB-26013

am-3576_26GT - Gray Tote
AndyMark Version of FRC 2026 Gray Tote - Compare to Official list

• 1 - 574 ml Air Reservoir with Push Connect Fittings (am-2649)
• 2 - Logitech Controller F310 (am-2064)
• 1 - Pneumatic Control Module (am-2858)
• 1 - AMPD AndyMark Power Distribution (am-5754)
• 1 - Vivid-Hosting VH-109 FRC Radio V1.5 (am-5583a)
• 1 - NOCO Battery Charger 1 Bank with SB50 Connectors (am-4968_1)
• 4 - 2.5 in. CIM Motor (am-0255)
• 1 - MK Battery, ES17-12 (1/2 of am-0844)
• 1 - NI roboRIO 2.0 (am-3000a)
• 3 - 6 Gauge 12 Inch PVC Insulated Battery Cable (am-0009)
• 1 - Bumper Material Cordura Red 160 in. x 20 in. (+/- 2 in.) (am-2675)
• 1 - Bumper Material Cordura Blue 160 in. x 20 in. (+/- 2 in.) (am-2676)
• 1 - Viair 90C Air Compressor (am-2005)
• 1 - REV NEO Brushless Motor V1.1 (am-4258a)
• 4 - REV SPARK MAX Brushless and Brushed DC Motor Controller (am-4261)
• 1 - navX2 MXP Robotics Navigation Sensor (am-3060c)
• 1 - Black Electrical Tape (am-3582_Black)
• 1 - USB 2.0 to Ethernet Adapter (am-3580) - *does not include extra USB ports
• 1 - 6 Foot USB A to USB B 2.0 Cable (am-3579)
• 8 - 6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX (am-0805)
• 110 - WAGO 221 Series InLine Splicing Connector with Lever (am-4728) - *replaces many individual electrical connectors
• 1 - CKD Double Solenoid Valve (am-2343a)
• 3 - Pneumatic Fitting Straight 1/4 in. Tube to Thread M5 Male (am-2384)
• 1 - Norgren Regulator and Bracket (am-2020)
• 1 - REV Analog Pressure Sensor (am-3219)
• 100 - Cable Ties 4 in. (am-1589_natural)
• 100 - Cable Tie 8 in. (am-1552_natural)
• 2 - Inline Pressure Gauge with 1/4 in. Press-in Tube Fittings (am-4223)
• 2 - 1 Part, 3/8 in. Round Bore, 0.25 in. Thick Collar Clamp (am-1647)
• 1 - Micro SD to USB Reader (am-5292)
• 1 - Pneumatic Reservoir Bracket (am-2008)
• 1 - Heat Shrink Kit Red and Black 198 Pieces (am-4767) - *replaces 4ft lengths of Heat Shrink
• 1 - Pneumatic Fittings Kit (am-2678a) - *replaces many individual pneumatic fittings

Items NOT in the AM version:

• BB22445150, TTB-0129

am-3576_26DB - Drive Base
AndyMark Version of FRC 2026 Drive Base - Compare to Official list

• 1 - AM14U6 - 6 Wheel Drop Center Robot Drive Base - 2026 FRC Kit of Parts Drive Base (am-14u6_846)
• 1 - AM14U Family Vertical Battery Tray (am-3964a)
• 1 - AM14U6 Bumper Brackets and Fasteners Kit (am-3966a)