Filters
- Batteries & Chargers (1)
- Bevel & Worm Gearboxes (2)
- Brackets & Plates (2)
- Compliant & Intake (1)
- Control Systems (1)
- Drive Systems & Bases & Chassis (3)
- Extrusion & Structure (1)
- FIRST LEGO LEAGUE 2024-2025 - FLL SUBMERGED℠ (1)
- FIRST Robotics Competition 2024 CRESCENDO (1)
- FIRST Robotics Competition 2025 REEFSCAPE (1)
- FIRST Robotics Competition Bundles (4)
- FIRST Tech Challenge Robot Build Bundles (1)
- FRC Control System (1)
- FTC Chassis (4)
- Gearboxes (2)
- Gearmotors (1)
- Gears (1)
- Merchandise (1)
- Miscellaneous Hardware (1)
- Motors (1)
- O-Rings & Grommets (2)
- Spacers (1)
- Sporting & Playground Equipment (1)
- Sprockets (1)
- 0.125 in. [3.2 mm] (1/8) Round (6)
- 0.157 in. [4.0 mm] Round (1)
- 0.192 in. [4.9 mm] Round (4)
- 0.196 in. [5 mm] Round (1)
- 0.197 in. [5 mm] Hex (2)
- 0.201 in. [5.1 mm] Round (2)
- 0.210 in. [5.3 mm] Round (1)
- 0.222 in. [5.6 mm] Round (1)
- 0.236 in. [6 mm] D (5)
- 0.236 in. [6 mm] Round (6)
- 0.240 in. [6.1 mm] Round (1)
- 0.250 in. [6.4 mm] (1/4) Round (3)
- 0.252 in. [6.4 mm] Round (1)
- 0.260 in. [6.6 mm] Round (1)
- 0.275 in. [7.0 mm] Round (1)
- 0.313 in. [8 mm] (5/16) NUB Bore (4)
- 0.313 in. [8 mm] (5/16) Round (20)
- 0.316 in. [8.0 mm] Round (1)
- 0.375 in. [9.5 mm] (3/8) Hex (17)
- 0.375 in. [9.5 mm] (3/8) Round (12)
- 0.379 in. [9.6 mm] Round (1)
- 0.382 in. [9.7 mm] Round (1)
- 0.394 in. [10 mm] DD (4)
- 0.394 in. [10 mm] Round (7)
- 0.405 in. [10.3 mm] Round (2)
- 0.420 in. [10.7 mm] Round (3)
- 0.430 in. [10.9 mm] Round (1)
- 0.500 in. [12.7 mm] (1/2) Hex (36)
- 0.500 in. [12.7 mm] (1/2) Round (27)
- 0.517 in. [13.1 mm] Round (1)
- 0.526 in. [13.4 mm] Round (1)
- 0.551 in. [14 mm] Hex (2)
- 0.591 in. [15.0 mm] Round (1)
- 0.594 in. [15.1 mm] Round (1)
- 0.625 in. [15.9 mm] (5/8) Round (2)
- 0.75 in. [19.1] (3/4) Round (1)
- 0.750 in. [19.1 mm] (3/4) Hex (10)
- 0.750 in. [19.1 mm] (3/4) Round (7)
- 0.787 in. [20 mm] Round (1)
- 0.870 in. [22.1 mm] Round (1)
- 0.875 in. [22.2 mm] (7/8) Round (2)
- 0.875 in. [22.3 mm] (7/8) Round (2)
- 1.125 in. [28.6 mm] (1-1/8) Bearing Bore (37)
- 1.250 in. [31.8 mm] (1-1/4) Round (2)
- 1.510 in. [38.4 mm] Round (1)
- C24T Servo Spline (1)
- Falcon Spline (2)
- 0.156 in. [4 mm] (1)
- 0.157 in. [4 mm] (1)
- 0.188 in. [4.8 mm] (2)
- 0.192 in. [4.9 mm] (4)
- 0.201 in. [5.1 mm] (2)
- 0.21 in. [5.3 mm] (1)
- 0.222 in. [5.6 mm] (1)
- 0.238 in. [6.05 mm] (1)
- 0.24 in. [6.1 mm] (1)
- 0.25 in. [6.4 mm] (1)
- 0.252 in. [6.4 mm] (1)
- 0.26 in. [6.6 mm] (1)
- 0.275 in. [7 mm] (1)
- 0.313 in. [7.9 mm] (1)
- 0.315 in. [8 mm] (1)
- 0.344 in. [8.7 mm] (1)
- 0.375 in. [9.5 mm] (3)
- 0.379 in. [9.6 mm] (1)
- 0.382 in. [9.7 mm] (1)
- 0.405 in. [10.3 mm] (2)
- 0.42 in. [10.7 mm] (3)
- 0.5 in. [12.7 mm] (7)
- 0.505 in. [12.8 mm] (1)
- 0.509 in. [12.9 mm] (1)
- 0.517 in. [13.1 mm] (1)
- 0.526 in. [13.4 mm] (1)
- 0.591 in. [15 mm] (1)
- 0.594 in. [15.1 mm] (1)
- 0.61 in. [15.5 mm] (1)
- 0.625 in. [15.9 mm] (1)
- 0.87 in. [22.1 mm] (1)
- 1.125 in. [28.6 mm] (2)
- 1.25 in. [31.8 mm] (2)
- 1.299 in. [33 mm] (1)
- 1.5 in. [38.1 mm] (1)
- 1.97 in. [50 mm] (1)
- 2.559 in [65 mm] (1)
- 0.031 in. [0.8 mm] (1)
- 0.094 in. [2.39 mm] (1)
- 0.125 in. [3.2 mm] (2)
- 0.188 in. [4.8 mm] (2)
- 0.197 in. [5 mm] (2)
- 0.25 in. [6.4 mm] (5)
- 0.315 in. [8 mm] (1)
- Between 0.25 in. [6.4 mm] and 0.375 in. [9.5 mm] (6)
- 0.375 in. [9.5 mm] (10)
- Between 0.375 in. [9.5 mm] and 0.5 in. [12.7 mm] (5)
- 0.5 in. [12.7 mm] (17)
- Between 0.5 in. [12.7 mm] and 0.625 in. [15.9 mm] (3)
- 0.625 in. [15.9 mm] (14)
- Between 0.625 in. [15.9 mm] and 0.75 in. [19.1 mm] (2)
- 0.75 in. [19.1 mm] (10)
- Between 0.75 in. [19.1 mm] and 0.875 in. [22.2 mm] (2)
- 0.875 in. [22.2 mm] (2)
- Between 0.875 in. [22.2 mm] and 1 in. [25.4 mm] (1)
- 1 in. [25.4 mm] (6)
- Between 1 in. [25.5 mm] and 1.25 in. [31.8 mm] (4)
- 1.25 in. [31.8 mm] (4)
- Between 1.25 in. [31.8 mm] and 1.5 in. [38.1 mm] (2)
- 1.5 in. [38.1 mm] (2)
- Between 1.5 in. [38.1 mm] and 1.75 in. [44.5 mm] (3)
- 1.75 in. [44.5 mm] (4)
- Between 1.75 in. [44.5 mm] and 2 in. [50.8 mm] (7)
- 2 in. [50.8 mm] (3)
- 2.25 in. [57.2 mm] (5)
- Between 2.362 in. [60 mm] and 2.425 in. [61.6 mm] (3)
- 2.5 in. [63.5 mm] (3)
- 2.75 in. [69.9 mm] (1)
- 3 in. [76.2 mm] (4)
- 3.25 in. [82.6 mm] (1)
- 4.331 in. [110 mm] (1)
- 4.724 in. [120 mm] (1)
- 20 in. [508 mm] (2)
- 23 in. [584.2 mm] (1)
- 23.68 in. [601.47 mm] (1)
- 46.67 in. [1185.42 mm] (1)
- ABS (1)
- Acetal (3)
- Alloy Steel (21)
- Aluminum (273)
- Black Delrin (1)
- black polycarbonate (1)
- Brass (25)
- Bronze (3)
- Carbox Nitrile (1)
- Copper (2)
- Euroboard (5)
- Extruded HIPS (2)
- gray TPU rubber (1)
- HDPE (2)
- High Density Foam (3)
- Molded Plastic (1)
- Natural Rubber (1)
- Nickel (1)
- Nitrile (1)
- Nylon (27)
- nylon spinning on steel (1)
- Plastic (4)
- Polycarbonate (37)
- Polyethylene (1)
- Polyolefin (1)
- Polypropylene (1)
- PVC (8)
- Rubber (1)
- SBR (2)
- Silicone (1)
- Stainless Steel (7)
- Steel (244)
- Thermoplastic (1)
- TPU (9)
- Turboelectric EVA Foam (1)
- Urethane (1)
- Urethane rubber (2)
- white nylon (1)
- Zinc Plated Steel (1)
- 0.236 in. [6 mm] (1)
- 0.25 in. [6.4 mm] (4)
- 0.315 in. [8 mm] (4)
- 0.343 in. [8.7 mm] (1)
- 0.36 in. [9.1 mm] (1)
- 0.375 in. [9.5 mm] (3)
- 0.437 in. [11.1 mm] (1)
- 0.438 in. [11.1 mm] (1)
- 0.472 in. [12 mm] (1)
- 0.5 in. [12.7 mm] (10)
- 0.512 in. [13 mm] (1)
- 0.566 in. [14.4 mm] (1)
- 0.625 in. [15.9 mm] (5)
- 0.64 in. [16.3 mm] (1)
- 0.655 in. [16.6 mm] (1)
- 0.68 in. [17.3 mm] (5)
- 0.75 in. [19.1 mm] (4)
- 0.768 in. [19.5 mm] (2)
- 0.787 in. [20 mm] (1)
- 0.84 in. [21.3 mm] (1)
- 0.875 in. [22.2 mm] (1)
- 0.935 in. [23.7 mm] (1)
- 0.94 in. [23.9 mm] (4)
- 0.984 in. [25 mm] (1)
- 1 in. [25.4 mm] (2)
- 1.125 in. [28.6 mm] (1)
- 1.24 in. [31.5 mm] (1)
- 1.29 in. [32.8 mm] (1)
- 1.637 in. [41.6 mm] (1)
- 1.772 in. [45 mm] (1)
- 1.93 in. [49 mm] (1)
- 2.25 in. [57.2 mm] (1)
- 3 in. [76.2 mm] (1)
Hi-Tec Servo model HS-81
3.0 / 5.0
1 Review
Manufactured by Hi-Tec RCD USA Model HS-81 Specifications Documentation Free Speed: 60° / 0.11 Seconds @ 4.8 V, 60° / 0.09 Seconds @ 6...
View full detailsFutaba Servo, model S148
Description Specifications Documentation Manufactured by Futaba, the S148 Standard Servo yields increased power and speed with a reduced ...
View full detailsWireless Controller for HERO
5.0 / 5.0
1 Review
Description Specifications Documentation FIRST Robotics Competition Legality: As this controller uses wireless connectivity, this is not...
View full details48:1 CIM Sport with 1/2 in. Hex Output
Description Specifications Documentation The gearbox has a gear ratio of 48:1 with a ½ in. Hex Output. A free packet of red tacky grease ...
View full detailsREV 15 mm 30 Degree Bracket 8 Pack
Description Specifications Documentation This metal 30 degree bracket is used with the REV 15 mm Extrusion System. Version 2 brackets off...
View full detailsShifter Shaft
Description Specifications Documentation This shifting shaft connects the dog gear and the shifter block on an AM Shifter and a Super Shi...
View full details6 mm Round Bore Slim Shaft Collar
Description Specifications Documentation This collar clamp is useful for locating and retaining items on a 6 mm shaft or 5mm hex shaft. ...
View full detailsNano Tube 20 in. Drive Chassis, 3 Shaft, 6 Pneumatic Wheels
Description Specifications Documentation This drive base is tough and ready for the road. We've driven this drive base on hilly ground, b...
View full detailsOutdoor Rhino Track Drive
5.0 / 5.0
3 Reviews
Description Specifications Documentation We introduced the Rhino Track Drive in late 2015, and it's been storming competition fields ever...
View full detailsWater Game Goat T-Shirt
5.0 / 5.0
1 Review
Description Specifications Documentation This stylish shirt is just what you need to complete your robotics wardrobe. Here at AndyMark we...
View full details12 Tooth Pinion Toughbox Mount Plate
Description Specifications Documentation Optional polycarbonate plate for the Toughbox gearbox. This mount plate is designed so that the ...
View full detailsNano Tube 31, Right, Three 1/2 in. Key Shafts, 25 Chain Drive
5.0 / 5.0
2 Reviews
Description Specifications Documentation Product Usage:All AndyMark gearboxes require grease for proper operation and long life. We sugge...
View full detailsToughbox Gearbox with 10.71:1 Ratio Steel Gears
Description Specifications Documentation This toughbox has a gear ratio of 10.71:1 with a 14 tooth CIM gear. This toughbox has Steel g...
View full detailsUSB A Female to USB A Female Adapter
The USB Female to Female coupler allows you to extend a USB cable. Specifications Documentation
Five Channel Line Following Sensor
Description Specifications Documentation This board is meant to be used for black line tracking. This sensor contains a five-channel infr...
View full detailsINTO THE DEEP℠ Partial to Full Game Set Conversion Kit
Description Specifications Documentation This kit supplements a Partial Field of the 2024-2025 FIRST Tech Challenge game, INTO THE DEEP℠ ...
View full detailsM5 Nylock Nut, [Qty-50]
5.0 / 5.0
2 Reviews
M5 x 0.8 Nylock Nut Specifications Documentation Finish: Zinc plated Hex Width: 8 mm Material: Steel Package Quantity: 50 Thread...
View full detailsGL.iNet GL-AR750S-Ext (Slate) Gigabit Travel AC VPN Router
Description Specifications Documentation NOT for use in FIRST Robotics Competition (FRC) events, please see FIRST Robotics Competition R...
View full detailsAM14U3 Upgrade Kit 6 in. SR Mecanum Wheels
Description Specifications Documentation Note:Please notice that this kit is NOT recommended for use with the AM14U4 2019 version of the ...
View full detailsServo Shift Hardware Package
Description Specifications Documentation Here is what you need to shift a Super Shifter with a HS-422HD servo. This is a hardware package...
View full detailsToughbox Mini - None - 12.75:1
Description Specifications Documentation This toughbox mini has a gear ratio of 12.75:1 and doesn't come with a mounting plate. We sugges...
View full detailsULTIMATE GOAL Wobble Goal Pipe
Description Specifications Documentation THIS GAME IS A PAST SEASON, be sure that this item is for the correct game you are looking for. ...
View full details8 in. Aluminum Dualie Omni Wheel
5.0 / 5.0
2 Reviews
Description Specifications Documentation 8" Aluminum Dualie Omni WheelThese wheels combine the best features of the AndyMark Trick Wheels...
View full details4-40 x 0.75 in. Socket Head Cap Screw
This #4-40 screw is used in our Pan and Tilt Assembly for Camera, am-0568 Specifications Documentation Head: Socket Cap Length: 0.75 i...
View full details